Many thanks, i'll give this a shot.

--- On Thu, 2/19/09, De Wit Tom tom.dewit@neoria.be wrote:

From: De Wit Tom tom.dewit@neoria.be Subject: RE: lun config_check error To: "Romeo Theriault" romeotheriault@gmail.com, "kwindapo@yahoo.com" kwindapo@yahoo.com, "toasters@mathworks.com" toasters@mathworks.com, "tmacmd@gmail.com" tmacmd@gmail.com Date: Thursday, February 19, 2009, 11:11 PM In a single_image cluster, both nodes need to have the same WWNN to be able to access LUNS on both nodes of the cluster. You can find the following at this link: http://now.netapp.com/NOW/knowledge/docs/ontap/rel7261_vs/html/ontap/bsag/13...

Caution If you have a storage system cluster, and the cfmode of each system is single_image, then you must change the WWNN on both systems. If both systems do not have the same WWNN, hosts cannot access LUNs on the cluster.

To change the WWNN, complete the following step.

Step

Action

1

Enter the following command:

fcp nodename nodename

nodename is a 64-bit WWNN address.

Example

fcp nodename 50:a9:80:00:02:00:8d:ff

Just copy the WWNN of one of the systems and change the other node to the same one. It doesn't matter which one you take ...

I don't know if this is possible in production. I think you'll have to restart the fcp service to enable the change, but I'm not sure.

Grtz, Tom

---

From: owner-toasters@mathworks.com [owner-toasters@mathworks.com] On Behalf Of Romeo Theriault [romeotheriault@gmail.com] Sent: 19 February 2009 20:34 To: kwindapo@yahoo.com; toasters@mathworks.com; tmacmd@gmail.com Subject: Re: lun config_check error

The following FCP HBAs appear to be down 0a LINK NOT CONNECTED 0b LINK NOT CONNECTED

Hmm, what is the output of fcp show adapter?

Local FCP nodename does not match the cluster partner's FCP nodename.

And you are running in single_image mode just fine with other hosts?

That is really bizarre.

I'm not sure, if the nodenames are different you may want to try bringing down the fcp service and then try starting it up again to see if that helps.

Good luck,

Romeo

On Wed, Feb 18, 2009 at 12:43 PM, kunle windapo <kwindapo@yahoo.commailto:kwindapo@yahoo.com> wrote: hello,

we have a clustered FAS6070 , running in single image cfmode.

a solaris machine can no longer access luns presented from filer. on running config check i get this error;

vhe-cl6n2> lun config_check The following FCP HBAs appear to be down 0a LINK NOT CONNECTED 0b LINK NOT CONNECTED Local FCP nodename does not match the cluster partner's FCP nodename.

any ideas on resolution would be appreciated.

-- Romeo Theriault System Administrator Information Technology Services