No

I have two other netapp's with 7.0.4, which is working.

No usermap.cfg is needed.

/tom

________________________________

Från: Glenn Walker [mailto:ggwalker@mindspring.com] Skickat: den 1 mars 2007 13:13 Till: Langborg Tom; Parisi, Justin; toasters@mathworks.com Ämne: RE: usermap problem

If the unix names and windows names are not the same, you must always use usermap.cfg file. This has not changed since around ONTAP 5.2 to my knowledge.

Glenn

________________________________

From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Langborg Tom Sent: Thursday, March 01, 2007 3:55 AM To: Parisi, Justin; toasters@mathworks.com Subject: SV: usermap problem

Yes I use usermap.cfg now

But the old version could I use the ldap.usermap config.

I don't want to manage a usermap.cfg when I have all information in ldap.

I didn't need that in the Ontap 7.0.4.

Regards

tom

________________________________

Från: Parisi, Justin [mailto:Justin.Parisi@netapp.com] Skickat: den 28 februari 2007 20:33 Till: Langborg Tom; toasters@mathworks.com Ämne: RE: usermap problem

You need to do your user mapping through the /etc/usermap.cfg file on the filer.

http://now.netapp.com/NOW/knowledge/docs/olio/guides/ontap_troubleshooting/u...

________________________________

From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Langborg Tom Sent: Wednesday, February 28, 2007 10:07 AM To: toasters@mathworks.com Subject: usermap problem

Watch out.

I got usermap problem after uppgrade to 7.2.1.1.

I use ldap.usermap for usermapping.

The unix name are not the same as windows name.

With unix name same as windows name it still works.

If there are someone who now any fix for this problem,

Please send me a letter.

Regards

tom