Hi,
I couldn’t find entries with „NVMEM“ in the name, but here’s everything that has „BAT“ in its name – is that what we’re looking for?
san01::> system node environment sensors show -name Bat* Node Sensor State Value/Units Crit-Low Warn-Low Warn-Hi Crit-Hi ---- --------------------- ------ ----------- -------- -------- ------- ------- san01n01 Bat Present normal PRESENT Bat Temp normal 24 C 0 5 53 58 Bat Volt normal 8100 mV 5500 5600 8500 8600 Bat Curr normal 0 mA - - 2320 2600 Bat Rem Cap normal 3328 mA*hr - - - - Bat Full Cap normal 3328 mA*hr - - - - Bat Charge Curr normal 0 mA - - 2200 2300 Bat Charge Volt normal 8200 mV - - 8900 9000 Bat Initial FCC normal 3200 mA*hr - - - - Bat Dstg Cycles normal 21 cycles 2 5 - - Bat Power Fault normal GOOD Bat Dcharge FET normal ON Bat Charge FET normal ON Bat Cycle Count normal 4 cycles - - - - san01n02 Bat Present normal PRESENT Bat Temp normal 24 C 0 5 53 58 Bat Volt normal 8100 mV 5500 5600 8500 8600 Bat Curr normal 0 mA - - 2320 2600 Bat Rem Cap normal 3328 mA*hr - - - - Bat Full Cap normal 3328 mA*hr - - - - Bat Charge Curr normal 0 mA - - 2200 2300 Bat Charge Volt normal 8200 mV - - 8900 9000 Bat Initial FCC normal 3200 mA*hr - - - - Bat Dstg Cycles normal 21 cycles 2 5 - - Bat Power Fault normal GOOD Bat Dcharge FET normal ON Bat Charge FET normal ON Bat Cycle Count normal 3 cycles - - - - 28 entries were displayed.
Alexander Griesser Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail: AGriesser@anexia-it.commailto:AGriesser@anexia-it.com Web: http://www.anexia-it.comhttp://www.anexia-it.com/
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
Von: Mark Flint [mailto:mf1@sanger.ac.uk] Gesendet: Donnerstag, 2. März 2017 12:16 An: Alexander Griesser AGriesser@anexia-it.com Betreff: Re: NVMEM discharge FET off?
Take a look at the output from system sensors, should show you the battery, whether it’s charging or not, And at what voltage
System node environment sensors show
And look for the nvmem battery info
`Mark
From: <toasters-bounces@teaparty.netmailto:toasters-bounces@teaparty.net> on behalf of Alexander Griesser <AGriesser@anexia-it.commailto:AGriesser@anexia-it.com> Date: Saturday, 25 February 2017 at 20:42 To: "toasters@teaparty.netmailto:toasters@teaparty.net" <toasters@teaparty.netmailto:toasters@teaparty.net> Subject: NVMEM discharge FET off?
Hi,
anyone ever had these?
2/25/2017 19:39:32 san01n01 EMERGENCY nvmem.battery.capLowCrit: The NVMEM battery capacity is critically low (0 cycles). To prevent data loss, the system will shut down in 20 minutes. 2/25/2017 17:43:26 san01n02 EMERGENCY nvmem.battery.discFET.off: The NVMEM battery discharge FET is off. To prevent data loss, the system will shut down in 5 minutes. 2/25/2017 17:32:26 san01n02 ALERT nvmem.battery.FET.off: The NVMEM battery charge FET is off. To prevent data loss, the system will shut down in 24 hours. 2/25/2017 17:29:27 san01n01 EMERGENCY nvmem.battery.capLowCrit: The NVMEM battery capacity is critically low (0 cycles). To prevent data loss, the system will shut down in 20 minutes. 2/25/2017 16:20:52 san01n01 EMERGENCY nvmem.battery.discFET.off: The NVMEM battery discharge FET is off. To prevent data loss, the system will shut down in 5 minutes.
The system did not shut down and all `system health` related commands I’m aware of tell me, that everything is good. This is a brand new AFF A300, but it’s been running since about a month now, so it’s not been powered on today or anything like that which would rectify these messages sometimes.
Best,
Alexander Griesser Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail: AGriesser@anexia-it.commailto:AGriesser@anexia-it.com Web: http://www.anexia-it.comhttp://www.anexia-it.com/
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
-- The Wellcome Trust Sanger Institute is operated by Genome Research Limited, a charity registered in England with number 1021457 and a company registered in England with number 2742969, whose registered office is 215 Euston Road, London, NW1 2BE.
Check the event log in diag mode – I just had one but it cleared itself 10 seconds later: ****1::*> event log show -message-name nvmem.battery.discFET* Time Node Severity Event ------------------- ---------------- ------------- --------------------------- 3/2/2017 10:07:02 ****1-03 NOTICE nvmem.battery.discFET.normal: The NVMEM battery discharge FET is on. 3/2/2017 10:06:52 ****1-03 EMERGENCY nvmem.battery.discFET.off: The NVMEM battery discharge FET is off. To prevent data loss, the system will shut down in 5 minutes. 2 entries were displayed.
But the normal message doesn’t show unless you are in advanced/diag
m
From: toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.net] On Behalf Of Alexander Griesser Sent: Thursday, March 2, 2017 5:49 AM To: Mark Flint mf1@sanger.ac.uk Cc: toasters@teaparty.net Subject: AW: NVMEM discharge FET off?
Hi,
I couldn’t find entries with „NVMEM“ in the name, but here’s everything that has „BAT“ in its name – is that what we’re looking for?
san01::> system node environment sensors show -name Bat* Node Sensor State Value/Units Crit-Low Warn-Low Warn-Hi Crit-Hi ---- --------------------- ------ ----------- -------- -------- ------- ------- san01n01 Bat Present normal PRESENT Bat Temp normal 24 C 0 5 53 58 Bat Volt normal 8100 mV 5500 5600 8500 8600 Bat Curr normal 0 mA - - 2320 2600 Bat Rem Cap normal 3328 mA*hr - - - - Bat Full Cap normal 3328 mA*hr - - - - Bat Charge Curr normal 0 mA - - 2200 2300 Bat Charge Volt normal 8200 mV - - 8900 9000 Bat Initial FCC normal 3200 mA*hr - - - - Bat Dstg Cycles normal 21 cycles 2 5 - - Bat Power Fault normal GOOD Bat Dcharge FET normal ON Bat Charge FET normal ON Bat Cycle Count normal 4 cycles - - - - san01n02 Bat Present normal PRESENT Bat Temp normal 24 C 0 5 53 58 Bat Volt normal 8100 mV 5500 5600 8500 8600 Bat Curr normal 0 mA - - 2320 2600 Bat Rem Cap normal 3328 mA*hr - - - - Bat Full Cap normal 3328 mA*hr - - - - Bat Charge Curr normal 0 mA - - 2200 2300 Bat Charge Volt normal 8200 mV - - 8900 9000 Bat Initial FCC normal 3200 mA*hr - - - - Bat Dstg Cycles normal 21 cycles 2 5 - - Bat Power Fault normal GOOD Bat Dcharge FET normal ON Bat Charge FET normal ON Bat Cycle Count normal 3 cycles - - - - 28 entries were displayed.
Alexander Griesser Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail: AGriesser@anexia-it.commailto:AGriesser@anexia-it.com Web: http://www.anexia-it.comhttp://www.anexia-it.com/
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
Von: Mark Flint [mailto:mf1@sanger.ac.uk] Gesendet: Donnerstag, 2. März 2017 12:16 An: Alexander Griesser <AGriesser@anexia-it.commailto:AGriesser@anexia-it.com> Betreff: Re: NVMEM discharge FET off?
Take a look at the output from system sensors, should show you the battery, whether it’s charging or not, And at what voltage
System node environment sensors show
And look for the nvmem battery info
`Mark
From: <toasters-bounces@teaparty.netmailto:toasters-bounces@teaparty.net> on behalf of Alexander Griesser <AGriesser@anexia-it.commailto:AGriesser@anexia-it.com> Date: Saturday, 25 February 2017 at 20:42 To: "toasters@teaparty.netmailto:toasters@teaparty.net" <toasters@teaparty.netmailto:toasters@teaparty.net> Subject: NVMEM discharge FET off?
Hi,
anyone ever had these?
2/25/2017 19:39:32 san01n01 EMERGENCY nvmem.battery.capLowCrit: The NVMEM battery capacity is critically low (0 cycles). To prevent data loss, the system will shut down in 20 minutes. 2/25/2017 17:43:26 san01n02 EMERGENCY nvmem.battery.discFET.off: The NVMEM battery discharge FET is off. To prevent data loss, the system will shut down in 5 minutes. 2/25/2017 17:32:26 san01n02 ALERT nvmem.battery.FET.off: The NVMEM battery charge FET is off. To prevent data loss, the system will shut down in 24 hours. 2/25/2017 17:29:27 san01n01 EMERGENCY nvmem.battery.capLowCrit: The NVMEM battery capacity is critically low (0 cycles). To prevent data loss, the system will shut down in 20 minutes. 2/25/2017 16:20:52 san01n01 EMERGENCY nvmem.battery.discFET.off: The NVMEM battery discharge FET is off. To prevent data loss, the system will shut down in 5 minutes.
The system did not shut down and all `system health` related commands I’m aware of tell me, that everything is good. This is a brand new AFF A300, but it’s been running since about a month now, so it’s not been powered on today or anything like that which would rectify these messages sometimes.
Best,
Alexander Griesser Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail: AGriesser@anexia-it.commailto:AGriesser@anexia-it.com Web: http://www.anexia-it.comhttp://www.anexia-it.com/
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
-- The Wellcome Trust Sanger Institute is operated by Genome Research Limited, a charity registered in England with number 1021457 and a company registered in England with number 2742969, whose registered office is 215 Euston Road, London, NW1 2BE.
Also nothing :-/
san01::*> event log show -message-name nvmem.battery.discFET* There are no entries matching your query.
san01::*>
But it didn’t happen again since then, so I’m not sure if this was just a hickup or an issue that will get bigger in the future…
Alexander Griesser Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail: AGriesser@anexia-it.commailto:AGriesser@anexia-it.com Web: http://www.anexia-it.comhttp://www.anexia-it.com/
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
Von: Weber, Mark A [mailto:mark-a-weber@uiowa.edu] Gesendet: Donnerstag, 2. März 2017 17:26 An: Alexander Griesser AGriesser@anexia-it.com Cc: toasters@teaparty.net Betreff: RE: NVMEM discharge FET off?
Check the event log in diag mode – I just had one but it cleared itself 10 seconds later: ****1::*> event log show -message-name nvmem.battery.discFET* Time Node Severity Event ------------------- ---------------- ------------- --------------------------- 3/2/2017 10:07:02 ****1-03 NOTICE nvmem.battery.discFET.normal: The NVMEM battery discharge FET is on. 3/2/2017 10:06:52 ****1-03 EMERGENCY nvmem.battery.discFET.off: The NVMEM battery discharge FET is off. To prevent data loss, the system will shut down in 5 minutes. 2 entries were displayed.
But the normal message doesn’t show unless you are in advanced/diag
m
From: toasters-bounces@teaparty.netmailto:toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.net] On Behalf Of Alexander Griesser Sent: Thursday, March 2, 2017 5:49 AM To: Mark Flint <mf1@sanger.ac.ukmailto:mf1@sanger.ac.uk> Cc: toasters@teaparty.netmailto:toasters@teaparty.net Subject: AW: NVMEM discharge FET off?
Hi,
I couldn’t find entries with „NVMEM“ in the name, but here’s everything that has „BAT“ in its name – is that what we’re looking for?
san01::> system node environment sensors show -name Bat* Node Sensor State Value/Units Crit-Low Warn-Low Warn-Hi Crit-Hi ---- --------------------- ------ ----------- -------- -------- ------- ------- san01n01 Bat Present normal PRESENT Bat Temp normal 24 C 0 5 53 58 Bat Volt normal 8100 mV 5500 5600 8500 8600 Bat Curr normal 0 mA - - 2320 2600 Bat Rem Cap normal 3328 mA*hr - - - - Bat Full Cap normal 3328 mA*hr - - - - Bat Charge Curr normal 0 mA - - 2200 2300 Bat Charge Volt normal 8200 mV - - 8900 9000 Bat Initial FCC normal 3200 mA*hr - - - - Bat Dstg Cycles normal 21 cycles 2 5 - - Bat Power Fault normal GOOD Bat Dcharge FET normal ON Bat Charge FET normal ON Bat Cycle Count normal 4 cycles - - - - san01n02 Bat Present normal PRESENT Bat Temp normal 24 C 0 5 53 58 Bat Volt normal 8100 mV 5500 5600 8500 8600 Bat Curr normal 0 mA - - 2320 2600 Bat Rem Cap normal 3328 mA*hr - - - - Bat Full Cap normal 3328 mA*hr - - - - Bat Charge Curr normal 0 mA - - 2200 2300 Bat Charge Volt normal 8200 mV - - 8900 9000 Bat Initial FCC normal 3200 mA*hr - - - - Bat Dstg Cycles normal 21 cycles 2 5 - - Bat Power Fault normal GOOD Bat Dcharge FET normal ON Bat Charge FET normal ON Bat Cycle Count normal 3 cycles - - - - 28 entries were displayed.
Alexander Griesser Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail: AGriesser@anexia-it.commailto:AGriesser@anexia-it.com Web: http://www.anexia-it.comhttp://www.anexia-it.com/
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
Von: Mark Flint [mailto:mf1@sanger.ac.uk] Gesendet: Donnerstag, 2. März 2017 12:16 An: Alexander Griesser <AGriesser@anexia-it.commailto:AGriesser@anexia-it.com> Betreff: Re: NVMEM discharge FET off?
Take a look at the output from system sensors, should show you the battery, whether it’s charging or not, And at what voltage
System node environment sensors show
And look for the nvmem battery info
`Mark
From: <toasters-bounces@teaparty.netmailto:toasters-bounces@teaparty.net> on behalf of Alexander Griesser <AGriesser@anexia-it.commailto:AGriesser@anexia-it.com> Date: Saturday, 25 February 2017 at 20:42 To: "toasters@teaparty.netmailto:toasters@teaparty.net" <toasters@teaparty.netmailto:toasters@teaparty.net> Subject: NVMEM discharge FET off?
Hi,
anyone ever had these?
2/25/2017 19:39:32 san01n01 EMERGENCY nvmem.battery.capLowCrit: The NVMEM battery capacity is critically low (0 cycles). To prevent data loss, the system will shut down in 20 minutes. 2/25/2017 17:43:26 san01n02 EMERGENCY nvmem.battery.discFET.off: The NVMEM battery discharge FET is off. To prevent data loss, the system will shut down in 5 minutes. 2/25/2017 17:32:26 san01n02 ALERT nvmem.battery.FET.off: The NVMEM battery charge FET is off. To prevent data loss, the system will shut down in 24 hours. 2/25/2017 17:29:27 san01n01 EMERGENCY nvmem.battery.capLowCrit: The NVMEM battery capacity is critically low (0 cycles). To prevent data loss, the system will shut down in 20 minutes. 2/25/2017 16:20:52 san01n01 EMERGENCY nvmem.battery.discFET.off: The NVMEM battery discharge FET is off. To prevent data loss, the system will shut down in 5 minutes.
The system did not shut down and all `system health` related commands I’m aware of tell me, that everything is good. This is a brand new AFF A300, but it’s been running since about a month now, so it’s not been powered on today or anything like that which would rectify these messages sometimes.
Best,
Alexander Griesser Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail: AGriesser@anexia-it.commailto:AGriesser@anexia-it.com Web: http://www.anexia-it.comhttp://www.anexia-it.com/
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
-- The Wellcome Trust Sanger Institute is operated by Genome Research Limited, a charity registered in England with number 1021457 and a company registered in England with number 2742969, whose registered office is 215 Euston Road, London, NW1 2BE.
There is a BURT for this one.
http://mysupport.netapp.com/NOW/cgi-bin/bol?Type=Detail&Display=1063994
It looks like an SP firmware bug and should be fixed in the next SP firmware release.
Duncan Cummings NetApp Specialist Interactive Pty Ltd Telephone +61 7 3323 0800 Facsimile +61 7 3323 0899 Mobile +61 403 383 050 www.interactive.com.auhttp://www.interactive.com.au
-------Confidentiality & Legal Privilege------------- "This email is intended for the named recipient only. The information contained in this message may be confidential, or commercially sensitive. If you are not the intended recipient you must not reproduce or distribute any part of the email, disclose its contents to any other party, or take any action in reliance on it. If you have received this email in error, please contact the sender immediately. Please delete this message from your computer. Confidentiality and legal privilege are not waived or lost by reason of mistaken delivery to you." From: toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.net] On Behalf Of Alexander Griesser Sent: Saturday, 11 March 2017 9:51 AM To: Weber, Mark A mark-a-weber@uiowa.edu Cc: toasters@teaparty.net Subject: AW: NVMEM discharge FET off?
Also nothing :-/
san01::*> event log show -message-name nvmem.battery.discFET* There are no entries matching your query.
san01::*>
But it didn’t happen again since then, so I’m not sure if this was just a hickup or an issue that will get bigger in the future…
Alexander Griesser Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail: AGriesser@anexia-it.commailto:AGriesser@anexia-it.com Web: http://www.anexia-it.comhttp://www.anexia-it.com/
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
Von: Weber, Mark A [mailto:mark-a-weber@uiowa.edu] Gesendet: Donnerstag, 2. März 2017 17:26 An: Alexander Griesser <AGriesser@anexia-it.commailto:AGriesser@anexia-it.com> Cc: toasters@teaparty.netmailto:toasters@teaparty.net Betreff: RE: NVMEM discharge FET off?
Check the event log in diag mode – I just had one but it cleared itself 10 seconds later: ****1::*> event log show -message-name nvmem.battery.discFET* Time Node Severity Event ------------------- ---------------- ------------- --------------------------- 3/2/2017 10:07:02 ****1-03 NOTICE nvmem.battery.discFET.normal: The NVMEM battery discharge FET is on. 3/2/2017 10:06:52 ****1-03 EMERGENCY nvmem.battery.discFET.off: The NVMEM battery discharge FET is off. To prevent data loss, the system will shut down in 5 minutes. 2 entries were displayed.
But the normal message doesn’t show unless you are in advanced/diag
m
From: toasters-bounces@teaparty.netmailto:toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.net] On Behalf Of Alexander Griesser Sent: Thursday, March 2, 2017 5:49 AM To: Mark Flint <mf1@sanger.ac.ukmailto:mf1@sanger.ac.uk> Cc: toasters@teaparty.netmailto:toasters@teaparty.net Subject: AW: NVMEM discharge FET off?
Hi,
I couldn’t find entries with „NVMEM“ in the name, but here’s everything that has „BAT“ in its name – is that what we’re looking for?
san01::> system node environment sensors show -name Bat* Node Sensor State Value/Units Crit-Low Warn-Low Warn-Hi Crit-Hi ---- --------------------- ------ ----------- -------- -------- ------- ------- san01n01 Bat Present normal PRESENT Bat Temp normal 24 C 0 5 53 58 Bat Volt normal 8100 mV 5500 5600 8500 8600 Bat Curr normal 0 mA - - 2320 2600 Bat Rem Cap normal 3328 mA*hr - - - - Bat Full Cap normal 3328 mA*hr - - - - Bat Charge Curr normal 0 mA - - 2200 2300 Bat Charge Volt normal 8200 mV - - 8900 9000 Bat Initial FCC normal 3200 mA*hr - - - - Bat Dstg Cycles normal 21 cycles 2 5 - - Bat Power Fault normal GOOD Bat Dcharge FET normal ON Bat Charge FET normal ON Bat Cycle Count normal 4 cycles - - - - san01n02 Bat Present normal PRESENT Bat Temp normal 24 C 0 5 53 58 Bat Volt normal 8100 mV 5500 5600 8500 8600 Bat Curr normal 0 mA - - 2320 2600 Bat Rem Cap normal 3328 mA*hr - - - - Bat Full Cap normal 3328 mA*hr - - - - Bat Charge Curr normal 0 mA - - 2200 2300 Bat Charge Volt normal 8200 mV - - 8900 9000 Bat Initial FCC normal 3200 mA*hr - - - - Bat Dstg Cycles normal 21 cycles 2 5 - - Bat Power Fault normal GOOD Bat Dcharge FET normal ON Bat Charge FET normal ON Bat Cycle Count normal 3 cycles - - - - 28 entries were displayed.
Alexander Griesser Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail: AGriesser@anexia-it.commailto:AGriesser@anexia-it.com Web: http://www.anexia-it.comhttp://www.anexia-it.com/
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
Von: Mark Flint [mailto:mf1@sanger.ac.uk] Gesendet: Donnerstag, 2. März 2017 12:16 An: Alexander Griesser <AGriesser@anexia-it.commailto:AGriesser@anexia-it.com> Betreff: Re: NVMEM discharge FET off?
Take a look at the output from system sensors, should show you the battery, whether it’s charging or not, And at what voltage
System node environment sensors show
And look for the nvmem battery info
`Mark
From: <toasters-bounces@teaparty.netmailto:toasters-bounces@teaparty.net> on behalf of Alexander Griesser <AGriesser@anexia-it.commailto:AGriesser@anexia-it.com> Date: Saturday, 25 February 2017 at 20:42 To: "toasters@teaparty.netmailto:toasters@teaparty.net" <toasters@teaparty.netmailto:toasters@teaparty.net> Subject: NVMEM discharge FET off?
Hi,
anyone ever had these?
2/25/2017 19:39:32 san01n01 EMERGENCY nvmem.battery.capLowCrit: The NVMEM battery capacity is critically low (0 cycles). To prevent data loss, the system will shut down in 20 minutes. 2/25/2017 17:43:26 san01n02 EMERGENCY nvmem.battery.discFET.off: The NVMEM battery discharge FET is off. To prevent data loss, the system will shut down in 5 minutes. 2/25/2017 17:32:26 san01n02 ALERT nvmem.battery.FET.off: The NVMEM battery charge FET is off. To prevent data loss, the system will shut down in 24 hours. 2/25/2017 17:29:27 san01n01 EMERGENCY nvmem.battery.capLowCrit: The NVMEM battery capacity is critically low (0 cycles). To prevent data loss, the system will shut down in 20 minutes. 2/25/2017 16:20:52 san01n01 EMERGENCY nvmem.battery.discFET.off: The NVMEM battery discharge FET is off. To prevent data loss, the system will shut down in 5 minutes.
The system did not shut down and all `system health` related commands I’m aware of tell me, that everything is good. This is a brand new AFF A300, but it’s been running since about a month now, so it’s not been powered on today or anything like that which would rectify these messages sometimes.
Best,
Alexander Griesser Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail: AGriesser@anexia-it.commailto:AGriesser@anexia-it.com Web: http://www.anexia-it.comhttp://www.anexia-it.com/
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
-- The Wellcome Trust Sanger Institute is operated by Genome Research Limited, a charity registered in England with number 1021457 and a company registered in England with number 2742969, whose registered office is 215 Euston Road, London, NW1 2BE.
Click herehttps://www.mailcontrol.com/sr/0lqwhR!qR1XGX2PQPOmvUryxFzioNvdXlMjNjgCfqc+GVtF1ptsR4!MOtzsrqFm5!WDoLgGEdhmg1M3YVHc55g== to report this email as spam.
Great, thanks – Watching this BURT now to see when the fix arrives.
Best,
Alexander Griesser Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail: AGriesser@anexia-it.commailto:AGriesser@anexia-it.com Web: http://www.anexia-it.comhttp://www.anexia-it.com/
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
Von: Duncan Cummings [mailto:dcummings@interactive.com.au] Gesendet: Montag, 13. März 2017 01:35 An: Alexander Griesser AGriesser@anexia-it.com; Weber, Mark A mark-a-weber@uiowa.edu Cc: toasters@teaparty.net Betreff: RE: NVMEM discharge FET off?
There is a BURT for this one.
http://mysupport.netapp.com/NOW/cgi-bin/bol?Type=Detail&Display=1063994
It looks like an SP firmware bug and should be fixed in the next SP firmware release.
Duncan Cummings NetApp Specialist Interactive Pty Ltd Telephone +61 7 3323 0800 Facsimile +61 7 3323 0899 Mobile +61 403 383 050 www.interactive.com.auhttp://www.interactive.com.au
-------Confidentiality & Legal Privilege------------- "This email is intended for the named recipient only. The information contained in this message may be confidential, or commercially sensitive. If you are not the intended recipient you must not reproduce or distribute any part of the email, disclose its contents to any other party, or take any action in reliance on it. If you have received this email in error, please contact the sender immediately. Please delete this message from your computer. Confidentiality and legal privilege are not waived or lost by reason of mistaken delivery to you." From: toasters-bounces@teaparty.netmailto:toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.net] On Behalf Of Alexander Griesser Sent: Saturday, 11 March 2017 9:51 AM To: Weber, Mark A <mark-a-weber@uiowa.edumailto:mark-a-weber@uiowa.edu> Cc: toasters@teaparty.netmailto:toasters@teaparty.net Subject: AW: NVMEM discharge FET off?
Also nothing :-/
san01::*> event log show -message-name nvmem.battery.discFET* There are no entries matching your query.
san01::*>
But it didn’t happen again since then, so I’m not sure if this was just a hickup or an issue that will get bigger in the future…
Alexander Griesser Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail: AGriesser@anexia-it.commailto:AGriesser@anexia-it.com Web: http://www.anexia-it.comhttp://www.anexia-it.com/
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
Von: Weber, Mark A [mailto:mark-a-weber@uiowa.edu] Gesendet: Donnerstag, 2. März 2017 17:26 An: Alexander Griesser <AGriesser@anexia-it.commailto:AGriesser@anexia-it.com> Cc: toasters@teaparty.netmailto:toasters@teaparty.net Betreff: RE: NVMEM discharge FET off?
Check the event log in diag mode – I just had one but it cleared itself 10 seconds later: ****1::*> event log show -message-name nvmem.battery.discFET* Time Node Severity Event ------------------- ---------------- ------------- --------------------------- 3/2/2017 10:07:02 ****1-03 NOTICE nvmem.battery.discFET.normal: The NVMEM battery discharge FET is on. 3/2/2017 10:06:52 ****1-03 EMERGENCY nvmem.battery.discFET.off: The NVMEM battery discharge FET is off. To prevent data loss, the system will shut down in 5 minutes. 2 entries were displayed.
But the normal message doesn’t show unless you are in advanced/diag
m
From: toasters-bounces@teaparty.netmailto:toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.net] On Behalf Of Alexander Griesser Sent: Thursday, March 2, 2017 5:49 AM To: Mark Flint <mf1@sanger.ac.ukmailto:mf1@sanger.ac.uk> Cc: toasters@teaparty.netmailto:toasters@teaparty.net Subject: AW: NVMEM discharge FET off?
Hi,
I couldn’t find entries with „NVMEM“ in the name, but here’s everything that has „BAT“ in its name – is that what we’re looking for?
san01::> system node environment sensors show -name Bat* Node Sensor State Value/Units Crit-Low Warn-Low Warn-Hi Crit-Hi ---- --------------------- ------ ----------- -------- -------- ------- ------- san01n01 Bat Present normal PRESENT Bat Temp normal 24 C 0 5 53 58 Bat Volt normal 8100 mV 5500 5600 8500 8600 Bat Curr normal 0 mA - - 2320 2600 Bat Rem Cap normal 3328 mA*hr - - - - Bat Full Cap normal 3328 mA*hr - - - - Bat Charge Curr normal 0 mA - - 2200 2300 Bat Charge Volt normal 8200 mV - - 8900 9000 Bat Initial FCC normal 3200 mA*hr - - - - Bat Dstg Cycles normal 21 cycles 2 5 - - Bat Power Fault normal GOOD Bat Dcharge FET normal ON Bat Charge FET normal ON Bat Cycle Count normal 4 cycles - - - - san01n02 Bat Present normal PRESENT Bat Temp normal 24 C 0 5 53 58 Bat Volt normal 8100 mV 5500 5600 8500 8600 Bat Curr normal 0 mA - - 2320 2600 Bat Rem Cap normal 3328 mA*hr - - - - Bat Full Cap normal 3328 mA*hr - - - - Bat Charge Curr normal 0 mA - - 2200 2300 Bat Charge Volt normal 8200 mV - - 8900 9000 Bat Initial FCC normal 3200 mA*hr - - - - Bat Dstg Cycles normal 21 cycles 2 5 - - Bat Power Fault normal GOOD Bat Dcharge FET normal ON Bat Charge FET normal ON Bat Cycle Count normal 3 cycles - - - - 28 entries were displayed.
Alexander Griesser Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail: AGriesser@anexia-it.commailto:AGriesser@anexia-it.com Web: http://www.anexia-it.comhttp://www.anexia-it.com/
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
Von: Mark Flint [mailto:mf1@sanger.ac.uk] Gesendet: Donnerstag, 2. März 2017 12:16 An: Alexander Griesser <AGriesser@anexia-it.commailto:AGriesser@anexia-it.com> Betreff: Re: NVMEM discharge FET off?
Take a look at the output from system sensors, should show you the battery, whether it’s charging or not, And at what voltage
System node environment sensors show
And look for the nvmem battery info
`Mark
From: <toasters-bounces@teaparty.netmailto:toasters-bounces@teaparty.net> on behalf of Alexander Griesser <AGriesser@anexia-it.commailto:AGriesser@anexia-it.com> Date: Saturday, 25 February 2017 at 20:42 To: "toasters@teaparty.netmailto:toasters@teaparty.net" <toasters@teaparty.netmailto:toasters@teaparty.net> Subject: NVMEM discharge FET off?
Hi,
anyone ever had these?
2/25/2017 19:39:32 san01n01 EMERGENCY nvmem.battery.capLowCrit: The NVMEM battery capacity is critically low (0 cycles). To prevent data loss, the system will shut down in 20 minutes. 2/25/2017 17:43:26 san01n02 EMERGENCY nvmem.battery.discFET.off: The NVMEM battery discharge FET is off. To prevent data loss, the system will shut down in 5 minutes. 2/25/2017 17:32:26 san01n02 ALERT nvmem.battery.FET.off: The NVMEM battery charge FET is off. To prevent data loss, the system will shut down in 24 hours. 2/25/2017 17:29:27 san01n01 EMERGENCY nvmem.battery.capLowCrit: The NVMEM battery capacity is critically low (0 cycles). To prevent data loss, the system will shut down in 20 minutes. 2/25/2017 16:20:52 san01n01 EMERGENCY nvmem.battery.discFET.off: The NVMEM battery discharge FET is off. To prevent data loss, the system will shut down in 5 minutes.
The system did not shut down and all `system health` related commands I’m aware of tell me, that everything is good. This is a brand new AFF A300, but it’s been running since about a month now, so it’s not been powered on today or anything like that which would rectify these messages sometimes.
Best,
Alexander Griesser Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail: AGriesser@anexia-it.commailto:AGriesser@anexia-it.com Web: http://www.anexia-it.comhttp://www.anexia-it.com/
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
-- The Wellcome Trust Sanger Institute is operated by Genome Research Limited, a charity registered in England with number 1021457 and a company registered in England with number 2742969, whose registered office is 215 Euston Road, London, NW1 2BE.
Click herehttps://www.mailcontrol.com/sr/0lqwhR!qR1XGX2PQPOmvUryxFzioNvdXlMjNjgCfqc+GVtF1ptsR4!MOtzsrqFm5!WDoLgGEdhmg1M3YVHc55g== to report this email as spam.
-
Alexander Griesser -
Duncan Cummings -
Weber, Mark A