I have installed a new Cisco 3548 Switch. On the switch I set the port that my filer is plugged into to 100 full duplex and I get awefull throughput. I set the port to 10 full duplex and I get better throughput. What is problem here?
Filer = F720 DataOnTap = 5.3.7R1 Quad 10/100 Network Card Mediatype on the network port is not auto. I have tried auto and it does not help.
Jason Middlebrooks Systems Engineer Datalink Corp. 888-933-9327 x2970 jmiddlebrooks@datalink.com jasonmiddlebrooks@yahoo.com
On Wed, Nov 22, 2000 at 01:54:01PM -0500, jmiddlebrooks@datalink.com wrote:
I have installed a new Cisco 3548 Switch. On the switch I set the port that my filer is plugged into to 100 full duplex and I get awefull throughput. I set the port to 10 full duplex and I get better throughput. What is problem here?
Filer = F720 DataOnTap = 5.3.7R1 Quad 10/100 Network Card Mediatype on the network port is not auto. I have tried auto and it does not help.
set it to fd-100-tx on the filer
tell the cisco to be 100 full duplex
does that make a difference?
-
jmiddlebrooksļ¼ datalink.com -
Mike Horwath