6.1 System Admin Guide page 131.
You can get the 6.1 SysAdmin Guide from NOW.
Enjoy!
-- Adam Fox NetApp Professional Services, NC adamfox@netapp.com
-----Original Message----- From: Jeffrey Krueger [mailto:jkrueger@qualcomm.com] Sent: Thursday, May 17, 2001 5:03 PM To: Fox, Adam Cc: 'Jeffrey Krueger'; 'Honeycutt, Michael'; 'toasters@mathworks.com' Subject: Re: Hardware Upgrade
Could you point us at the relevent documentation that describes this? I've been searching NOW and haven't come up with it yet.
Thanks!
-- Jeff
On Thu, May 17, 2001 at 12:06:18PM -0700, Fox, Adam wrote:
I haven't received an explanation for it and honestly thought it sounded reasonable. It may work under another config, but I would think for the vast majority of configs, it shouldn't be a problem, especially that if you use the dual fiber cards, you get a fiber link for the first hop anyway.
If at all possible, I would wire it up that way just to stay within the known good configs.
-- Adam Fox NetApp Professional Services, NC adamfox@netapp.com
-----Original Message----- From: Jeffrey Krueger [mailto:jkrueger@qualcomm.com] Sent: Thursday, May 17, 2001 1:45 PM To: Fox, Adam Cc: 'Honeycutt, Michael'; 'toasters@mathworks.com' Subject: Re: Hardware Upgrade
On Wed, May 16, 2001 at 12:49:40PM -0700, Fox, Adam wrote:
It is suggested if you are hooking up a dual path loop that the B loop start at the opposite end of the loop as the A loop. In other words, the B loop starts on the last shelf on the A loop and works it's way back.
Why is that loop configuration suggested?
-- Jeff
-
Fox, Adam