Fwd: > fcp start ... shows logins from hosts I don't have zoned - toasters

10 Apr 2013

      Thank's for the replies.
Andrey,  I see from  "switchshow" on my Brocade 48000 that it is the
SwitchID (Switch embedded port D_ID) and it's the Brocade Switch logging
into the Filer I'm seeing.
Tue Apr  9 11:07:43 PDT [fas2240:scsitarget.ispfct.portLogin:notice]:
FCP login on Fibre Channel adapter '1a' from  '21:fd:00:05:1e:36:3e:d2',
address 0xfffc06.
SW48000_A_5_6:admin> switchshow
switchName:     SW48000_A_5_6
switchType:     42.2
switchState:    Online
switchMode:     Native
switchRole:     Principal
switchDomain:   6
switchId:       fffc06
switchWwn:      10:00:00:05:1e:36:3e:d2
Tue Apr  9 11:07:43 PDT [fas2240:scsitarget.ispfct.portLogin:notice]:
FCP login on Fibre Channel adapter '1b' from  '21:fd:00:05:1e:36:3d:96',
address 0xfffc07.
SW48000_B_7_8:admin> switchshow
switchName:     SW48000_B_7_8
switchType:     42.2
switchState:    Online
switchMode:     Native
switchRole:     Principal
switchDomain:   7
switchId:       fffc07
switchWwn:      10:00:00:05:1e:36:3d:96
Pete
On Tue, Apr 9, 2013 at 10:59 PM, Borzenkov, Andrey <
andrey.borzenkov@ts.fujitsu.com> wrote:
...
0xfffcXX is Brocade switch embedded port DID (XX is switch domain number).
2x:xx:00:05:1e:xx:xx:xx is Brocade switch port WWN. Switch by default
actively probes attached devices to obtain name server information. It is
using above DID and PWWN 21:fd:xx:xx:xx:xx:xx:xx (I did not find this PWWN
to be explicitly documented though).****

Andrey  ****

*From:* toasters-bounces@teaparty.net [mailto:
toasters-bounces@teaparty.net] *On Behalf Of *Peter Kain
*Sent:* Tuesday, April 09, 2013 10:37 PM
*To:* Toasters@teaparty.net
*Subject:* > fcp start ... shows logins from hosts I don't have zoned****

I'm setting up a new FAS2240 with a Dual FC card.

both ports are target adapters

each port is cabled to a separate brocade switch ****

a Solaris server with 2 fiber cards are cabled, one to each switch

Basically there are two separate paths to the Filer from the server
through two Brocade switches. ****
Where I'm confused is when I start Fiber channel services on the filer,
the adapters come online, the links come up, but then there are two logins
for each adapter.  One of the logins on each adapter are from my server,
networker.  ****
Can anyone tell me what the second login on each adapter is from.  I'm
fairly certain it's not an outside system.  ****
fas2240> fcp start
Tue Apr  9 11:07:40 PDT [fas2240:scsitarget.ispfct.onlining:notice]:
Onlining Fibre Channel target adapter 1a.
Tue Apr  9 11:07:40 PDT [fas2240:scsitarget.ispfct.onlining:notice]:
Onlining Fibre Channel target adapter 1b.
Tue Apr  9 11:07:43 PDT [fas2240:scsitarget.ispfct.linkUp:notice]: Link up
on Fibre Channel target adapter 1b.
Tue Apr  9 11:07:43 PDT [fas2240:scsitarget.ispfct.linkUp:notice]: Link up
on Fibre Channel target adapter 1a.
Tue Apr  9 11:07:43 PDT [fas2240:scsitarget.ispfct.portLogin:notice]:
FCP login on Fibre Channel adapter '1b' from  '21:fd:00:05:1e:36:3d:96',
address 0xfffc07.              <-- don't know what these are
Tue Apr  9 11:07:43 PDT [fas2240:scsitarget.ispfct.portLogin:notice]:
FCP login on Fibre Channel adapter '1a' from  '21:fd:00:05:1e:36:3e:d2',
address 0xfffc06.              <-- don't know what these are
Tue Apr  9 11:07:44 PDT [fas2240:scsitarget.ispfct.portLogin:notice]:
FCP login on Fibre Channel adapter '1b' from  '21:00:00:e0:8b:83:3a:65',
address 0x70400.               <-- networker
Tue Apr  9 11:07:44 PDT [fas2240:scsitarget.ispfct.portLogin:notice]:
FCP login on Fibre Channel adapter '1a' from  '21:00:00:e0:8b:83:eb:67',
address 0x60400.               <-- networker
fas2240> fcp show initiator
Initiators connected on adapter 1a:
Portname                  Group

21:00:00:e0:8b:83:eb:67   networker
Initiators connected on adapter 1b:
Portname                  Group

21:00:00:e0:8b:83:3a:65   networker
"fc_start.htm" 65 lines, 2097 characters****

--
Pete Kain
310-506-4475 ****
-- 
Pete Kain
310-506-4475

-- 
Pete Kain
310-506-4475