I think that means the SNMP counters are cactus (more accurately, they've gotten into a state that doesn't give information) I've seen this a couple of times running 6.5.2r1 and the only solution was to reboot the filer.
It's also possible for something similar to happen with DFM only, but I think they fixed that in DFm 3.x
Hope this helps Andrew
_____
From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Warkentin, Grant Sent: Friday, 5 August 2005 8:27 AM To: toasters@mathworks.com Subject: CPU stats in filer at a glance and DFM
We're running a FAS 960 with DOT 6.xx (that last current version of 6). Have noticed that the CPU usage stats are not being displayed in DFM also the CPU usage stats are not showing up in Filer at a glance.
Looks like we stopped getting stats about two weeks ago. CIFS, NFS and network use stats are still coming in properly.
The DFM client software seems to have current CPU usage stats though.
Anyone have an idea about how to get CPU usage to show up again?
Thanks.
Grant Warkentin System Administrator II City of Calgary - Information Technology Mail Drop == 8245 Ph: (403) 268-5629 Fax: (403) 268-2546
NOTICE - This communication is intended ONLY for the use of the person or entity named above and may contain information that is confidential or legally privileged. If you are not the intended recipient named above or a person responsible for delivering messages or communications to the intended recipient, YOU ARE HEREBY NOTIFIED that any use, distribution, or copying of this communication or any of the information contained in it is strictly prohibited. If you have received this communication in error, please notify us immediately by telephone and then destroy or delete this communication, or return it to us by mail if requested by us. The City of Calgary thanks you for your attention and cooperation.
Try restarting SNMP.
Before rebooting.
Justin Skinner http://www.180mph.com Powered by Electricty & NetBSD - http://www.netbsd.org
On Fri, 5 Aug 2005, George, Andrew wrote:
I think that means the SNMP counters are cactus (more accurately, they've gotten into a state that doesn't give information) I've seen this a couple of times running 6.5.2r1 and the only solution was to reboot the filer.
It's also possible for something similar to happen with DFM only, but I think they fixed that in DFm 3.x
Hope this helps Andrew
From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Warkentin, Grant Sent: Friday, 5 August 2005 8:27 AM To: toasters@mathworks.com Subject: CPU stats in filer at a glance and DFM
We're running a FAS 960 with DOT 6.xx (that last current version of 6). Have noticed that the CPU usage stats are not being displayed in DFM also the CPU usage stats are not showing up in Filer at a glance.
Looks like we stopped getting stats about two weeks ago. CIFS, NFS and network use stats are still coming in properly.
The DFM client software seems to have current CPU usage stats though.
Anyone have an idea about how to get CPU usage to show up again?
Thanks.
Grant Warkentin System Administrator II City of Calgary - Information Technology Mail Drop == 8245 Ph: (403) 268-5629 Fax: (403) 268-2546
NOTICE - This communication is intended ONLY for the use of the person or entity named above and may contain information that is confidential or legally privileged. If you are not the intended recipient named above or a person responsible for delivering messages or communications to the intended recipient, YOU ARE HEREBY NOTIFIED that any use, distribution, or copying of this communication or any of the information contained in it is strictly prohibited. If you have received this communication in error, please notify us immediately by telephone and then destroy or delete this communication, or return it to us by mail if requested by us. The City of Calgary thanks you for your attention and cooperation.
-
George, Andrew -
Justin Skinner