Re: Filer (F740) with CIFS and NT Terminal Server Edition (Metaframe) - toasters

21 Jun 2000


      Hi,
We are using such a setup from long time. You create a qtree or directory /vol/volname/home where all the home directories resides.
Then you access the home directories throught the automounter maps as 
userid 		filer:/vol/volname/home/&
Then set an option on the filer
cifs.home_dir                /vol/volname/home/ 
This works fine if the userid of the unix and NT matches or else you may have to edit the /etc/usermap.cfg.
kind regards
Bhaskar G
Philips Semiconductors, 
#3, Sterling Square,Madras Bank Road,
Off St Mark's Road,BANGALORE-560 001.
Voice :  +91 80 222 9200   Ext 5060
Fax: +91 80 2229700
David.Lockwood@benettonformula.com@SMTP@mathworks.com on 06/21/2000 04:45:27 PM
Sent by:	owner-toasters@mathworks.com
To:	toasters@mathworks.com@SMTP
cc:	 
Subject:	Filer (F740) with CIFS and NT Terminal Server Edition (Metaframe)
Classification:	Restricted
Has anybody had any experience using a filer with NT Terminal Server Edition and Metaframe. I want to be able to have users UNIX (HP-UX 10.20) home directories on the filer and for the user to also be able to access that data from their Terminal Server
(Metaframe 1.8) session.
----------------------------------------------------------------------
For further information on Benetton Formula 1 visit our web site at www.benettonf1.com. This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have
received this email in error please destroy and notify Benetton Formula on +44 1608678000.
----------------------------------------------------------------------