Hi Jochen, Snapinfo-lun is needed for SnapManager for Exchange(SME). This is where SME stores its information for recovery. Its basically used when running "up to the minute recovery", where it copied all the transcaction logs before it truncated them while creating the snapshot backups. So when you do an "up to the minute" recovery from older snapshots, it uses this location to bring in the older transaction logs to be replayed.

Why do you want to configure 2 separate aggregates? did you mean volumes? I'd rather have a very large aggregate with as many disks I can get hold of instead of 2 smaller aggregates. It definetly improves performance. The way we have it setup in our environemnt is 1 large aggregate with 3 volumes per exchange host.. - 1 vol for the storage group with luns for each store - 1 vol for log lun - 1 vol for snap info lun We also have other CIFS shares on volumes/qtrees within the same aggregate.

Hope this helps -G

On 3/29/06, Willeke, Jochen Jochen.Willeke@wincor-nixdorf.com wrote:

Hi everybody,

we are setting up an exchange 2003 system on a filer. Right now i am about to size the system. I often read that i need to have a snapinfo-lun. But i do not understand where i need this lun for. Exchange does not need it, does it?

What i want to configure are two aggregates. One containig qtrees with luns for the databasefiles and one aggregate with qtrees and luns for the logfiles. And if really needed i would put the snapinfo-lun into the logfile aggregate.

Perhaps somebody has already set up an exchange server on netapp storage and can help me.

Thanks a lot in advance

Jochen