All,
Just curious if the people here in this distribution list who are using NDMP backups can give me their NetApp config (filer type & number of disks) and their actual backup throughput.
If it's possible also the number and drive types connected and used backup software.
Thanks in advance
With kindest regards,
[cid:image001.gif@01C902A4.ADD10AA0]http://www.uptime.be email-disclaimerhttp://www.uptime.be/disclaimer.html
"Computers are like air conditioners - They stop working properly when you open Windows"
Hi,
FAS3050, single aggregate (72 x 15K, RAID-DP, 16 disks per raid group), NetWorker with DSA (i.e. data stream goes via LAN), approximately 40MB/s.
Should add that wafl scan report fragmentation ratio of 14; is always important to mention when we speak about backups.
С уважением / With best regards / Mit freundlichen Grüβen
--- Andrey Borzenkov Senior system engineer
________________________________ From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Van Eyken Michiel Sent: Wednesday, August 20, 2008 11:11 AM To: toasters@mathworks.com Subject: NDMP speed measured in the field
All,
Just curious if the people here in this distribution list who are using NDMP backups can give me their NetApp config (filer type & number of disks) and their actual backup throughput.
If it’s possible also the number and drive types connected and used backup software.
Thanks in advance
With kindest regards,
[cid:image001.gif@01C902BC.AEA7F5C0]http://www.uptime.be email-disclaimerhttp://www.uptime.be/disclaimer.html
"Computers are like air conditioners - They stop working properly when you open Windows"
-
Borzenkov, Andrey -
Van Eyken Michiel