I would look then on if you are running latest patches from Sun...
Eyal.
---------------------------------------------------------------------- eTraitel - I'm the new eBuzzword around !!! ---------------------------------------------------------------------- Eyal Traitel - Filer Escalation Engineer CNA, MCSE, CSA, NACA
Network Appliance BV Holland Office Center Kruisweg 799b 2132 NG, Hoofddorp The Netherlands Office: +31 23 567 9685 Cellular: +31 6 5497 2568 Email: eyal@netapp.com ---------------------------------------------------------------------- Get answers NOW! - NetApp On the Web - http://now.netapp.com ----------------------------------------------------------------------
-----Original Message----- From: benny.wistrom@cn.saab.se [mailto:benny.wistrom@cn.saab.se] Sent: Tuesday, January 23, 2001 1:57 PM To: Traitel Eyal Cc: NetApp Maillista Subject: Re: Automount fails on first attempt on Solaris
The reason I have enabled NFS over TCP is that Solaris first tries this protocol. I have the same problem when using NFS over UDP.
/Benny
"Traitel, Eyal" wrote:
Is the mounts on the AIX, HP-UX and Linux done also via TCP ? It might lead you to the fact that the mount over TCP just takes some more time to finish.
Just a suggestion, Eyal.
Why TCP by the way ? Did you check UDP ?
eTraitel - I'm the new eBuzzword around !!!
Eyal Traitel - Filer Escalation Engineer CNA, MCSE, CSA, NACA
Network Appliance BV Holland Office Center Kruisweg 799b 2132 NG, Hoofddorp The NetherlandsOffice: +31 23 567 9685 Cellular: +31 6 5497 2568 Email: eyal@netapp.com
Get answers NOW! - NetApp On the Web - http://now.netapp.com
-----Original Message----- From: benny.wistrom@cn.saab.se [mailto:benny.wistrom@cn.saab.se] Sent: Tuesday, January 23, 2001 1:31 PM To: NetApp Maillista Subject: Automount fails on first attempt on Solaris
Hi!
I have a problem with automount on Solaris. The problem appears on both Solaris 2.6 and Solaris 8. On the first attempt to access any directory located on the filer the automount request times out but on the second attempt it mounts the directory. It takes 15 seconds to mount the directory. All other mounts after the first one has been mounted works fine. This behaviour appears everytime I try to access a directory after the
automounter has released all mounts. Automount works just fine on AIX, HP-UX, Linux when accessing the same
directories.
We use NFS version 3 and NFS over TCP is enabled on the filer. We have OnTap 5.3.6R2 installed on the filer.
Any suggestions?
-- Regards:
Benny Wiström CSC Phone: +46 13 4653647 Systemadministrator 581 88 Linköping Fax: +46 13 185771 Benny.Wistrom@cn.saab.se Sweden Mobile: +46 13 4653647
We are running the latest patches from Sun.
/Benny
"Traitel, Eyal" wrote:
I would look then on if you are running latest patches from Sun...
Eyal.
eTraitel - I'm the new eBuzzword around !!!
Eyal Traitel - Filer Escalation Engineer CNA, MCSE, CSA, NACA
Network Appliance BV Holland Office Center Kruisweg 799b 2132 NG, Hoofddorp The NetherlandsOffice: +31 23 567 9685 Cellular: +31 6 5497 2568 Email: eyal@netapp.com
Get answers NOW! - NetApp On the Web - http://now.netapp.com
-----Original Message----- From: benny.wistrom@cn.saab.se [mailto:benny.wistrom@cn.saab.se] Sent: Tuesday, January 23, 2001 1:57 PM To: Traitel Eyal Cc: NetApp Maillista Subject: Re: Automount fails on first attempt on Solaris
The reason I have enabled NFS over TCP is that Solaris first tries this protocol. I have the same problem when using NFS over UDP.
/Benny
"Traitel, Eyal" wrote:
Is the mounts on the AIX, HP-UX and Linux done also via TCP ? It might lead you to the fact that the mount over TCP just takes
some
more time to finish.
Just a suggestion, Eyal.
Why TCP by the way ? Did you check UDP ?
eTraitel - I'm the new eBuzzword around !!!
Eyal Traitel - Filer Escalation Engineer CNA, MCSE, CSA, NACA
Network Appliance BV Holland Office Center Kruisweg 799b 2132 NG, Hoofddorp The NetherlandsOffice: +31 23 567 9685 Cellular: +31 6 5497 2568 Email: eyal@netapp.com
Get answers NOW! - NetApp On the Web - http://now.netapp.com
-----Original Message----- From: benny.wistrom@cn.saab.se [mailto:benny.wistrom@cn.saab.se] Sent: Tuesday, January 23, 2001 1:31 PM To: NetApp Maillista Subject: Automount fails on first attempt on Solaris
Hi!
I have a problem with automount on Solaris. The problem appears on both Solaris 2.6 and Solaris 8. On the first attempt to access any directory located on the filer
the
automount request times out but on the second attempt it mounts the directory. It takes 15 seconds to mount the directory. All other mounts after the first one has been mounted works fine. This behaviour appears everytime I try to access a directory after
the
automounter has released all mounts. Automount works just fine on AIX, HP-UX, Linux when accessing the
same
directories.
We use NFS version 3 and NFS over TCP is enabled on the filer. We have OnTap 5.3.6R2 installed on the filer.
Any suggestions?
-- Regards:
Benny Wiström CSC Phone: +46
13
4653647 Systemadministrator 581 88 Linköping Fax: +46
13
185771 Benny.Wistrom@cn.saab.se Sweden Mobile: +46
13
4653647
-- Regards:
Benny Wiström CSC Phone: +46 13 4653647 Systemadministrator 581 88 Linköping Fax: +46 13 185771 Benny.Wistrom@cn.saab.se Sweden Mobile: +46 13 4653647
Sometimes I think the surest sign that intelligent life exists elsewhere in the universe is that none of it has tried to contact us. -Calvin & Hobbes (Bill Watterson)
Ask your boss to reconsider -- it's so difficult to take "Go to hell" for an answer.
-
benny.wistrom＠cn.saab.se -
Traitel, Eyal