The filer will periodically fail to respond to RSH from a pc running NT 4.0 SP6. This is due to TCP ISN (Initial Sequence Number) used by NT 4.0 SP6. This bug has not been observed in some earlier NT 4.0 service packs, or in Windows 2000. For more information look at:

http://support.microsoft.com/support/kb/articles/q243/8/35.asp http://support.microsoft.com/support/kb/articles/q243/8/35.asp

Q243835 How to Prevent Predictable TCP/IP Initial Sequence Numbers.

Q243835 lists a hotfix that resolves this issue.

Regards, Mike Mankovsky Network Appliance Inc.

-----Original Message----- From: Uros Lampret [mailto:uros.lampret@ourspace.si] Sent: Thursday, March 08, 2001 12:56 AM To: toasters@mathworks.com Subject: RSH problem on NT 4.0

Hi!

I have problems performing RSH from specific servers.

This is from NT 4.0 SP6. The first RSH goes OK, the second one hangs. Every time! If a wait some time between RSH command it works OK. This is Exchange server. I tried it from five diferent servers and workstations and they all work fine.

I'd like to run batch to delete old snapshot, rename and create new. It always execute only first command and the others time out. Only on this server?

Any ideas?

Thanks!

Microsoft(R) Windows NT(TM) (C) Copyright 1985-1996 Microsoft Corp.

C:>rsh ntnas1 df Filesystem kbytes used avail capacity Mounted on /vol/vol0/ 101684188 3429404 98254784 3% /vol/vol0/ /vol/vol0/.snapshot 25421044 390456 25030588 2% /vol/vol0/.snapsh ot

C:>rsh ntnas1 version -> ntnas1:Connection timed out rsh: can't establish connection

_____________________________

Uros Lampret http://www.ourspace.si www.ourspace.si _____________________________