yep that was it.. thanks to you and the others that pointed that out. I knew it had to still be there..

Paul

From: "Richard Payne" richard.payne@amd.com To: "Paul Letta" letta@jlab.org, "toasters" toasters@teaparty.net Sent: Monday, February 9, 2015 10:51:41 AM Subject: RE: nfsstat -l not in 8.1 ?

You have multistore enabled/licensed. Instead run:

vfiler run vfiler0 nfsstat –l

--rdp

From: toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.net] On Behalf Of Paul Letta Sent: Monday, February 09, 2015 10:48 AM To: toasters Subject: nfsstat -l not in 8.1 ?

What happened to "nfsstat -l" on 8.1 ? I just tried to do this for the first time in a while.. "nfsstat -l" works fine on our 7.x and 8.2 filers..

Was it removed in 8.1..? I tried it with advanced commands turned on as well. I'm typing nfsstat dash ell...

thanks,

Paul

xx> version NetApp Release 8.1.4P1 7-Mode: Tue Feb 11 23:23:31 PST 2014

xx> options nfs.per_client_stats.enable nfs.per_client_stats.enable on

xx> nfsstat -l usage: nfsstat <interval> [ <count> ] usage: vfiler run <vfname> nfsstat -h [ -n [ <count> ] ] | [ [ <hostname or ip address> ] [ <interval> ] ] usage: vfiler run <vfname> nfsstat -l [ <count> ] usage: nfsstat -z usage: nfsstat -C usage: nfsstat [ -c ] [ -t ] xx> xx> priv set advanced Warning: These advanced commands are potentially dangerous; use them only when directed to do so by NetApp personnel. xx*> xx*> nfsstat -l usage: nfsstat <interval> [ <count> ] usage: vfiler run <vfname> nfsstat -h [ -n [ <count> ] ] | [ [ <hostname or ip address> ] [ <interval> ] ] usage: vfiler run <vfname> nfsstat -l [ <count> ] usage: nfsstat -z usage: nfsstat -C usage: nfsstat [ -c ] [ -t ]