We currently have a quad etherchannel/trunking set up working with a Cisco switch, and from Todd's post, you all know that it worked very well. Does anyone have any experience using etherchannel/trunking with any other vendors/products? Any info would be useful..
Paul
We've just been doing some fairly basic testing for a demo with a Foundry Networks NetIron NSR16 with no problems.....next step to use the cluster failover (but that's on hold for a couple of days whilst we sort out some other stuff !!!)
Best regards Mike
-----Original Message----- From: owner-dl-toasters@netapp.com [mailto:owner-dl-toasters@netapp.com]On Behalf Of Paul English Sent: 12 March 1999 21:55 To: toasters@mathworks.com Subject: Etherchannel/trunking
We currently have a quad etherchannel/trunking set up working with a Cisco switch, and from Todd's post, you all know that it worked very well. Does anyone have any experience using etherchannel/trunking with any other vendors/products? Any info would be useful..
Paul -- Paul English (Tallpaul) (508) 647-7715 tallpaul@mathworks.com (508) 647-7015 FAX Walkie Channel 2
On Fri, 12 Mar 1999, Paul English wrote:
Does anyone have any experience using etherchannel/trunking with any other vendors/products? Any info would be useful..
This is a vague question. I use trunking on Solaris 2.6 boxes. It seems to work fine. However, I don't have trunking set up yet on NetApps due to lack of ports on a switch. Thus, I have not tried trunking between a Solaris 2.6 box and a NetApp, to answer the second interpretation of your question. I should be able to do the latter by early April, I hope.
Tom
Paul English wrote:
We currently have a quad etherchannel/trunking set up working with a Cisco switch, and from Todd's post, you all know that it worked very well. Does anyone have any experience using etherchannel/trunking with any other vendors/products? Any info would be useful..
Title: Recommended Switches for Fast Etherchannel We have worked with three vendors whose products we have tested with Fast Etherchannel.
1. Cisco: The cisco catalyst 5000 is one of the switches that we have worked with. 2. Extreme Networks: The Extreme Nettworks Summit 4 is also a switch that is tested and approved. 3. Foundry Falstrons: Also tested and approved.
Abe. --
Paul-- Paul English (Tallpaul) (508) 647-7715 tallpaul@mathworks.com (508) 647-7015 FAX Walkie Channel 2
-- Ibrahima Bah Technical Support Engineer Network Appliance Inc. 2770 San Tomas Expressway 408-367-3000 Santa Clara, CA 95051 1-888-4-NetApp www.netapp.com
-
Ibrahima Bah -
mwalters -
Paul English -
tkaczma＠gryf.net