Another question: What kind of speed is common for a snapmirror happening on gige with jumbo frames? I'm only seeing 5-6Mb/s when I can get 40-50Mb/s going to a linux box. Is there something I'm missing in the setup? I have src as filer2-gig and dest as filer1 (not a specific ethernet but it has to use the gige link because it's on a different subnet).

Thanks,

Deanan

#-----Original Message----- #From: owner-toasters@mathworks.com #[mailto:owner-toasters@mathworks.com] On Behalf Of Stephane Bentebba #Sent: Friday, August 29, 2003 2:26 AM #To: Holland, William L #Cc: 'toasters@mathworks.com' #Subject: Re: SnapMirror Question # # #yes it should be do-able without any problem i think #Holland, William L wrote: # #>Is this do-able? #> #>FilerA - onsite LAN connection #>FilerB - onsite LAN connection #>NearStoreA - onsite LAN connection #>FilerZ - offsite WAN connection #> #>NearStoreA SnapMirror the QTrees on FilerA and FilerB into #one volume #>(maintaining the qtrees). FilerZ then SnapMirroring the volume from #>NearStoreA. #> #> #> # #-- #-- jetez un oeil ici http://www.sensiva.com/ -- #-- have a look here http://www.sensiva.com/ -- # # #