This will work fine and is supported.

For Volume SnapMirrors it's best to keep both sides on the same single-dot release. If they must be different, then the destination side needs to be higher.

For Qtree SnapMirror, you can mix releases versions more liberally.

But in your case you are within the same single-dot release (7.3) so you're fine.

-- Adam Fox ------------------------ Typed with my thumbs on a very small keyboard.

----- Original Message ----- From: steve klise klises@caminomedical.org To: toasters@mathworks.com toasters@mathworks.com Sent: Thu Jun 03 10:29:56 2010 Subject: snapmirror question

We are doing a head upgrade tonight, and will upgrade ontap from 7.24 and go to 7.3.3 GD. We have a bunch of filers that snapmirror to a 3070 that is 7.3.2.p3.

Our VAR said this should still be supported, snapmirroring from 7.3.3 to 7.3.2. Has anyone done this or confirmed if it will work? Any gotchas?

thanks always in advance.