Getting this warning in the "Active IQ Suggestions" since our last upgrade. It has a link under Corrective Action that leads to the top of NA's Hardware Universe site.
The root volumes for our three vservers are all only 0% or 1% used (1GB each).
But the "vol0" volumes show: scarab::> vol show Vserver Volume Aggregate State Type Size Available Used% --------- ------------ ------------ ---------- ---- ---------- ---------- ----- scarab-a vol0 aggr0_scarab_01 online RW 151.3GB 78.82GB 45% scarab-b vol0 aggr0_scarab_02 online RW 124.6GB 61.74GB 47%
I think I recall trying to resize a node's root volume from the CLI in the past and getting an error along the lines of "don't mess with this volume."
Look at the aggregate those "vol0" volumes are on, if there is space available:
vol size -vserver scarab-a -volume vol0 +50G vol size -vserver scarab-a -volume vol0 +50G
If they are partitioned, see if you have any root partitions available "storage aggregate show-spare-disks' -> look for non-0 root partitions
ChnageMe::*> storage aggregate show-spare-disks
Original Owner: ChnageMe-01 Pool0 Root-Data1-Data2 Partitioned Spares Local Local Data Root Physical Disk Type Class RPM Checksum Usable Usable Size Status ---------------- ------ ----------- ------ -------------- -------- -------- -------- -------- 1.0.22 SSD-CAP solid-state - block 0B *9.37GB* 13.97TB not zeroed 1.0.23 SSD-CAP solid-state - block 0B *9.37GB* 13.97TB not zeroed 1.0.46 SSD-CAP solid-state - block 6.98TB 0B 13.97TB not zeroed 1.0.47 SSD-CAP solid-state - block 6.98TB 0B 13.97TB not zeroed
I could add one more root partition to the aggregate and leave a single spare. in my case I might have to: aggregate show -fields maxraidsize root_aggr_01|root_aggr_02 -> if the maxraidsize = the # of disks in the aggregate, increase it a little by 1 or 2. then add a partition or two if available aggregate add disk root_aggr_01 -diskcount 1
--tmac
On Mon, Aug 28, 2023 at 11:38 AM Randy Rue randyrue@gmail.com wrote:
Getting this warning in the "Active IQ Suggestions" since our last upgrade. It has a link under Corrective Action that leads to the top of NA's Hardware Universe site.
The root volumes for our three vservers are all only 0% or 1% used (1GB each).
But the "vol0" volumes show: scarab::> vol show Vserver Volume Aggregate State Type Size Available Used%
scarab-a vol0 aggr0_scarab_01 online RW 151.3GB 78.82GB 45% scarab-b vol0 aggr0_scarab_02 online RW 124.6GB 61.74GB 47%
I think I recall trying to resize a node's root volume from the CLI in the past and getting an error along the lines of "don't mess with this volume." _______________________________________________ Toasters mailing list Toasters@teaparty.net https://www.teaparty.net/mailman/listinfo/toasters
-
Randy Rue -
tmac