Upgrading the attached SAN and the vendor wants to know this...
I suspect, the version of OnTap you are on, sysconfig -av and sysconfig -ac should suffice. Just look for your fcp target ports out of that. Should look something like this.
slot 0: Fibre Channel Target Host Adapter 0c (Dual-channel, QLogic 2532 (2562) rev. 2, 32-bit, <ONLINE>) Firmware rev: 5.3.0 Host Port Addr: 010c00 Cacheline size: 16 SRAM parity: Yes FC Nodename: 00:00:00:00:00:00:00:00 (0000000000000000) FC Portname: 00:00:00:00:00:00:00:00 (0000000000000000) Connection: PTP, Fabric SFP Vendor Name: AVAGO SFP Vendor P/N: AFBR-57D7APZ-NA1 SFP Vendor Rev: SFP Serial No.: AAsomething4 SFP Connector: LC SFP Capabilities: 2, 4, 8 Gbit/Sec
Will that suffice?
-Blake
On Mon, Nov 14, 2011 at 3:50 PM, Randy Rue rrue@fhcrc.org wrote:
Upgrading the attached SAN and the vendor wants to know this...
Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters
All drivers are bundled with Data ONTAP and the only thing of interest may be Data ONTAP version. This can be found with "version" command on filer. ________________________________________ From: toasters-bounces@teaparty.net [toasters-bounces@teaparty.net] On Behalf Of Randy Rue [rrue@fhcrc.org] Sent: Tuesday, November 15, 2011 03:50 To: toasters@teaparty.net Subject: How do I find the driver version for the FC HBA's on my 3170?
Upgrading the attached SAN and the vendor wants to know this...
_______________________________________________ Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters
-
Blake Golliher -
Borzenkov, Andrey -
Randy Rue