are u sure ??

i thought is just working w/ fc-adapters ?!

resetting an fc-adapter w/ connected tapedrives over an fc-switch is working fine, after eg. tapedrive replacement.

bye hannes

Drew O'Donnell wrote:

The following command successfully reinitialized the adapter to talk to our tape library without bouncing the filer.

toaster>priv set advanced

toaster>fcadmin reset_adapter "adapter#"

toaster>priv set admin

Drew

-----Original Message-----
From: jwitham@takedapharm.com [mailto:jwitham@takedapharm.com]
Sent: Thursday, April 18, 2002 7:14 AM
To: toasters@mathworks.com
Subject: rescan SCSI bus?

Hi Toasters:

Is it possible to rescan the SCSI bus on an F760 without rolling
the filer?  We just direct-attached some DLT7000 drives and don't
want to suffer an outage to make them work.  (hundreds of CIFS
connections... Oracle, Exchange, homedirs oh my!)

Thx,

-john


This message is for the designated recipient only and may contain
privileged or confidential information.  If you have received it
in error, please notify the sender immediately and delete the
original.  Any other use of the email by you is prohibited.