Dan,
Do the disks blink red at any regular interval? Do all the disks on a given shelf blink, or just some of the disks?
Thank you, Timothy Naple
tnaple@berkcom.com 510-644-1599 VOICE 510-644-1598 FAX 888-812-9040 TOLL-FREE
Berkeley Communications Corporation 2990 San Pablo Avenue Berkeley, CA 94702 http://www.berkcom.com
-----Original Message----- From: Daniel Finn [mailto:DFinn@studentadvantage.com] Sent: Thursday, September 26, 2002 8:15 AM To: 'toasters@mathworks.com' Subject: LED on drives flashes from green to red
I'm just wondering if this is normal and why it happens. I've recently been put in charge of admin'ing several F760s and am just starting to learm my way around them. I've noticed that some times the green LED will flash red for just a second and then back to green. This is on drives that are in use and getting quite a bit of I/O.
Thanks Dan
On Thu, Sep 26, 2002 at 03:53:17PM -0700, Timothy Naple wrote:
Dan,
Do the disks blink red at any regular interval? Do all the disks on a given shelf blink, or just some of the disks?
Sorry for picking up on such an old thread but I'm seeing the same behavior on a NetApp that a client of mine has. It seems to work just fine and I can't find anything 'wrong' with it other than all the red 'disk-failed' led lights blink on each shelf (there are two FC9s loaded with X21s) once every 10? seconds. The shelves don't do it at the same time. They are attached to a F740 all of the disk have the latest FW for the release it's runing.
Any clues as to what could be the problem here? The client has let their support lapse so calling netapp is out of the question for now.
-Kelsey