RE: Help with Network Appliance configuration ??? - toasters

29 Jun 1999


      Sr. Alexandre,
You appear to have the tape library connected to the wrong SCSI bus (the card in
slot 9). It should be connected to the onboard SCSI which is bus 0.
Boa Sorte,
Paul Benn
Network Appliance
-----Original Message-----
From: Alexandre Gomes (r7043c) [mailto:r7043c@email.sps.mot.com]
Sent: Tuesday, June 29, 1999 5:53 AM
To: lista de discussao
Subject: Help with Network Appliance configuration ???
Hi,
I'm installing budtool( version 4.5) on a Solaris machine to operate a
jukebox robotics connected to the Network Appliance ( F230) to do
backups. On the installation he gaves the following message ( I will use
NDMP protocol) :
The spt and sjb drivers are capable of communicating with devices
on any SCSI bus attached to this host. These drivers need to know
on which bus the jukebox is attached. The first bus (e.g. esp0) is
number 0, the second bus is number 1, and so on.
Only a number between 0 and 7 will be accepted.
Please enter the number of the SCSI bus for the jukebox:
Could someone help me, How I discover the SCSI bus where my jukebox is
connected on Net App.I execute the sysconfig on the NDMS  and it says :
paje> sysconfig -v
        NetApp Release 4.3.4: Wed Apr 22 16:25:06 PDT 1998
        System ID: 0016785098
        slot 0: System Board 90 MHz (NetApp System Board Ia rev-b)
                Firmware release:   1.9_i
                Memory Size:        192 MB
        slot 0: SCSI Host Adapter 0 (QLogic ISP 1040B)
                Firmware Version 2.26           Clock Rate 40MHz.
                In-Band Enclosure Services
                0 Swap Events, 0 Enclosure Events
        slot 0: Ethernet Controller e0
                MAC Address:        00:a0:98:00:0d:59 (100tx)
        slot 6: NVRAM (NetApp NVRAM I)
                Revision:           D2
                Serial Number:      7882
                Memory Size:        8 MB
                Battery 1 Status:   100% (3.26v)
                Battery 2 Status:   100% (3.24v)
        slot 9: Dual SCSI Host Adapter (NetApp SCSI Adapter II)
                SCSI Host Adapter 9a (Qlogic ISP 1040B)
                Firmware Version 2.26           Clock Rate 40MHz.
                0: SEAGATE ST39173WC       4218 Size=8.3GB (17783240
blocks)
                1: SEAGATE ST39173WC       4218 Size=8.3GB (17783240
blocks)
                2: SEAGATE ST39173WC       4218 Size=8.3GB (17783240
blocks)
                3: SEAGATE ST39173WC       4218 Size=8.3GB (17783240
blocks)
                4: SEAGATE ST39173WC       4218 Size=8.3GB (17783240
blocks)
                5: SEAGATE ST39173WC       4218 Size=8.3GB (17783240
blocks)
                6: SEAGATE ST39173WC       4218 Size=8.3GB (17783240
blocks)
                In-Band Enclosure Services
                0 Swap Events, 0 Enclosure Events
                SCSI Host Adapter 9b (Qlogic ISP 1040B)
                Firmware Version 2.26           Clock Rate 40MHz.
                3: Quantum DLT4000         CD5A 
                4: Quantum DLT4000         CD5A 
                In-Band Enclosure Services
                0 Swap Events, 0 Enclosure Events
Please, help to answers this question !!!
Thanks,
Alexandre Gomes