As long as the destination is Netapp, download and use NetApp XCP located at XCP.NetApp.Com

Typing errors courtesy of GBoard

Tim McCarthy, Principal Consultant

Proud Member of the NetApp ATeam ________________________________ From: toasters-bounces@teaparty.net toasters-bounces@teaparty.net on behalf of Mark Flint mf1@sanger.ac.uk Sent: Thursday, October 25, 2018 5:01:15 AM To: Yuvaraja Shivaram; toasters Subject: Re: Regarding Rsync data transfer

You can use -throttle on creation or modification, think the number defaults to kb.

So snapmirror create -source-path xxxxxx -destination-path xxxxxx -throttle 100 Would give you a snapmirror with a 100k max throughput. You’ll probably need a few more modifiers, depending on your requirements.

`Mark

From: toasters-bounces@teaparty.net on behalf of Yuvaraja Shivaram yuvaraja.kishan@gmail.com Date: Thursday, 25 October 2018 at 09:31 To: toasters toasters@teaparty.net Subject: Regarding Rsync data transfer

Hi all,

Any one knows how to throttle the speed in Rsync, i am setting some value say 7mb, but it is crossing the value during transmission, so any one knows about it,

please let me know on the same..

source different storage and destination cmode 9.4p2 version(netapp)

Regards Yuvaraja

-- The Wellcome Sanger Institute is operated by Genome Research Limited, a charity registered in England with number 1021457 and a company registered in England with number 2742969, whose registered office is 215 Euston Road, London, NW1 2BE.