Hi all...

Here's a question that I still have never got a straight answer on from anyone:

Using a F230 server with two wide SCSI busses. I have a wide shelf on my 9b bus, and a narrow DEC-Shelf (with personality module) on my 9a bus.

My Q is this:

On my 9a bus(only); since the personality module allows you to set the beginning SCSI/Wide address of the narrow shelf on the wide bus, could one essentially run TWO narrow shelves on a wide bus?

This would be done by setting the first narrow shelf to map narrow-SCSI ID's 0-6 to the wide-SCSI bus 0-6, and setting the personality module in the SECOND narrow shelf (on 9a) to superposition the second narrow-SCSI shelf's ID's 0-6 to the SCSI-wide bus ID's of 8-15?

If SO... then I could buy a personality module for one of my extra narrow shelves lying around and use TWO narrow shelves on the 9a bus of our F230!

If not.. I am thinking about ripping it all out and putting it on a Linux box running SW RAID and SAMBA. But I would really like to keep it set up on the NetApp box if possible.

Anyone know for SURE if this can be done (the former.. not the latter).

Thomas Weeks GTE SYSTEMS ENGINEER Testing-Integration Center "The Pit" Brooks AFB, DSN 240-5444