I have had to remove a d6irectly attached tape drive a few time on my F740. It hasn't caused any problems. However when I attach a new drive it will only recognise it if I do a reboot. I don't know if there's something similar to the Solaris "drvconfig" command but if not it would be a great feature to have.

Andrew Toon Technical Services Manager Trace Computers Plc

-----Original Message----- From: Paul Letta [mailto:letta@jlab.org] Sent: 07 August 2001 17:18 To: toasters@mathworks.com Subject: Direct attaching SCSI tape drives to 760's

Does anybody have any comments in regard to direct attaching SCSI drives 760's ? My concern is what happens when the drives fail ? I seem to have a drive failure rate of 3 or 4 a year. Currently I do not direct attach, so replacing them is no problem. But what happens to the filers when you remove a SCSI tape device hot ? Can you reattach a new one without rebooting the filer ? I do not think my environment would stand for a filer reboot each time a tape drive fails, but I really do not want to live with the 4MB/Sec I get for backups over the network now.

Any thoughts?

Thanks,

Paul

Disclaimer This email is confidential and intended solely for the use of the individual to whom it is addressed. Any views or opinions presented are solely those of the author and do not necessarily represent those of Trace Computers PLC. If you are not the intended recipient, be advised that you have received this email in error and that any use, dissemination, forwarding, printing, or copying of this mail is strictly prohibited