RR is half correct, use MX.

Will ASUP honor MX tables???/

-----Original Message----- From: Alan McLachlan [mailto:amclachlan@asi.com.au] Sent: Monday, January 27, 2003 5:14 PM To: Borders, Rich Cc: toasters@mathworks.com Subject: RE: Can Autosupport use multiple MailHosts?

Hi Rich,

10 Points for quick thinking, but Round Robin DNS is BAD BAD BAD - for nearly everything.

Why? Because it doesn't do health checks or test responses. (just ask your own NetCache guys, Brian or Kurt or someone, about why they recommend L4-7 switches rather than RRDNS for load balancing web servers).

If you have only one mailhost listed on the filer, it will only make one attempt to send the autosupport email. If that hostname is rotated via RRDNS to multiple real servers, then if one of those real servers fails 1/N autosupport emails (where N is the number of real servers) will fail to go anywhere. If that happens to be a critical message (i.e. major component failure or overheating), you don't want to be responsible for the message not getting through.

Using multiple mailhosts in the list on the filer itself is much safer.

regards,

Alan McLachlan Senior Systems Engineer Storage Management Solutions NetAppCA#0000019, FCNE

ASI Solutions www.asi.com.au Ph +61 2 6230 1566 Fax +61 2 6230 5343 Mobile +61 428 655644 e-mail amclachlan@asi.com.au

-----Original Message----- From: Borders, Rich [mailto:Rich.Borders@netapp.com] Sent: Tuesday, 28 January 2003 5:48 AM To: 'Walter Ellinthorpe'; Chris Thompson Cc: toasters@mathworks.com; david.lugo@unitedmessaging.com Subject: RE: Can Autosupport use multiple MailHosts?

Round robin dns would work also.

Network Appliance Technical Support Engineer rborders@netapp.com

Telephone: 1-919-993-5866 Hotline: 1-888-4-NETAPP

Working Hrs.: SUNDAY - WEDNESDAY 7:00 AM to 6:00 PM EDT Get answers NOW! - Netapp On the Web - http://now.netapp.com http://now.netapp.com/

Everyone at Network Appliance is committed to the highest level of customer satisfaction. If at any time you feel that you're less than very satisfied with our support please contact my manager Richard Bondranko at 919-993-5837 or rbond@netapp.com.

-----Original Message----- From: Walter Ellinthorpe [mailto:walter.ellinthorpe@unitedmessaging.com] Sent: Monday, January 27, 2003 12:33 PM To: Chris Thompson Cc: toasters@mathworks.com; david.lugo@unitedmessaging.com Subject: Re: Can Autosupport use multiple MailHosts?

Thanks,

One more Question: the only way I was able to get autosupport to work when I set these filers up was to have an entry in the /etc/hosts file looking something like this....

192.168.1.16 SMTP-A mailhost

So, to use multiple smtp hosts, would I need to have entries like....

192.168.1.16 SMTP-A mailhost 192.168.1.17 SMTP-B mailhost 192.168.1.18 SMTP-C mailhost 192.168.1.19 SMTP-D mailhost

Thanks again,

--Walter

Chris Thompson wrote:

walter.ellinthorpe@unitedmessaging.com mailto:walter.ellinthorpe@unitedmessaging.com (Walter Ellinthorpe) writes:

I have NetApp Filers from Chicago to South Carolina and I use

Autosupport to keep track of the health and happiness of each one. They

all have multiple SMTP servers on their local LAN.

1. Can I configure the Filers to use multiple SMTP gateways (e.g. if

SMTP-A fails, try SMTP-B. If SMTP-B fails try SMTP-C... etc.)?

2. If this CAN be done, how do I configure the Filers to do this?

options autosupport.mailhost SMTP-A,SMTP-B,SMTP-C

The na_options(1) man page says there can be up to five hosts in the

comma-separated list. I have used it successfully with three.

Chris Thompson

Email: cet1@cam.ac.uk mailto:cet1@cam.ac.uk