Unscrew one of the fans, pull it out, wait for the light to turn orange, push it back in. That should fire 4 snmp traps: 1. FanFail 2. Status critical 3. FanRepaired 4. Status normal

Alex.

-----Original Message----- From: Mark Allen [mailto:markallen@micron.com] Sent: Tuesday, July 09, 2002 19:29 To: toasters@mathworks.com Subject: How can I test or simulate an SNMP trap?

All:

I set up some snmp traps via filer view and I would like to simulate or test the traps to make sure they works. I set up traps for a failed disk, failed pdu,

failed fan, and cluster failover notification. The filer is in production and I would like to find a way to test this out without actually failing the hardware myself. Any ideas?

-Mark