Don't forget that when you get a new battery it does need to charge inside the system before you use it in production.

July ----- Original Message ----- From: "David Fent" dave@pdi.com To: "deanan" list@delusion.com Cc: toasters@mathworks.com Sent: Tuesday, January 13, 2004 3:22 PM Subject: Re: f800 batteries

I'm not sure it's related to your situation, but there is a bug report (Bug ID 47389) concerning false low battery warnings.

On Tue, 13 Jan 2004, deanan wrote:

...

Hi,

I have an older f840 no longer on support that's getting a low battery

warning.

...

Although nv says it's ok, I'd like to replace the battery: filer3*> nv NVRAM3 size: 134217728 (board max = 256MB) Battery status: OK EEPROM Signed: YES Battery voltage: 6720mV LM81 Multiplier: 56 EEPROM Version: 2

Is there someone that sells these batteries or knows specifically what battery to get? (I can't open the filer because it's in a remote

location)

...

Thanks,

Deanan

#-----Original Message----- #From: owner-toasters@mathworks.com #[mailto:owner-toasters@mathworks.com] On Behalf Of Bui, Marcus #Sent: Tuesday, January 13, 2004 7:23 AM #To: 'Jon Michael Gimpel'; 'toasters@mathworks.com' #Subject: RE: cifs audit # #It seems the server running the rsh script was not in the #Filer's host.equiv. After host.equiv updated, the script #worked. Should of double check :-) # #Thanks for the response. # #Marcus # # -----Original Message----- # From: owner-toasters@mathworks.com #[mailto:owner-toasters@mathworks.com] On Behalf Of Jon Michael Gimpel # Sent: Tuesday, January 13, 2004 1:47 AM # To: toasters@mathworks.com # Subject: Re: cifs audit # # # What are you attempting to audit? Is it the CIFS file #system .. such as read's, delete's, permission changes etc? #If so, CIFS still needs to be set to audit like that of the #native NTFS structure. You will need to do this via explorer by: # # - right clicking the directory or file # - security tab # - advanced # - auditing # - adding a common group or suspected user # - selecting what you are attempting to audit # # -Jon # # # # "Bui, Marcus" Marcus.Bui@aiminvestments.com wrote in #message news:0D1B378426DB3B4DB200AF4738F3E9E7090FD101@USHOUXML04... # # I have F820 running DOT 6.4.2P6 with CIFS only. # I noticed the cifs audit log does not log all events. The #audit log is dump and saved every night at midnight via a rsh #script. Looking through several log file, there are only a #few entries in each of the file. All of the entries are #within 16 minutes after midnight when the audit file is dump. # These are the settings. I compare it with two other Filers, #F880c DOT 6.4.2P12, with the same settings the audit log worked fine. # # # cifs.audit.enable on # cifs.audit.file_access_events.enable on # cifs.audit.logon_events.enable on # cifs.audit.logsize 204800000 # cifs.audit.saveas /etc/log/adtlog.evt # # Any ideas? # # # thanks, # # Marcus Bui # # # #________________________________ # # # # # Confidentiality Note: The information contained #in this message, and any attachments, may contain #confidential and/or privileged material. It is intended #solely for the person or entity to which it is addressed. Any #review, retransmission, dissemination, or taking of any #action in reliance upon this information by persons or #entities other than the intended recipient is prohibited. If #you received this in error, please contact the sender and #delete the material from any computer. # #________________________________ # #Confidentiality Note: The information contained in this #message, and any attachments, may contain confidential and/or #privileged material. It is intended solely for the person or #entity to which it is addressed. Any review, retransmission, #dissemination, or taking of any action in reliance upon this #information by persons or entities other than the intended #recipient is prohibited. If you received this in error, #please contact the sender and delete the material from any computer. # #

-- David Fent - Systems Administrator - PDI/Dreamworks