here's the error on bootup:
. . .
Stuck-at:283MB,3 Replace DIMM J30 Startup aborted
Unfortunately I do not currently have support from Netapp for this filer
so
I need to find a short term solution to my problem. The error above
points
out the bad dimm that needs replacement.
- Can I just remove the bad dimm and run with less memory temporarily?
Yes, although you will probably notice a performance hit. Also, they work in pairs so you will drop from 1GB straight to 512MB even if you leave it's parner in.
- I have a spare F740 that I can rob parts from, can I take a DIMM from
there and replace the bad one in this F760?
They are different sizes (740 is 4 x 128, 760 is 4 x 256). Also, they work in pairs. You might yield 768MB, or the system might complain. I haven't tried this - sorry :o)
- How do I locate DIMM J30?
The DIMM slots are marked on the mainboard.
**** ASI Solutions Disclaimer **** The material transmitted may contain confidential and/or privileged material and is intended only for the addressee. If you receive this in error, please notify the sender and destroy any copies of the material immediately. ASI will protect your Privacy according to the 10 Privacy Principles outlined under the new Privacy Act, Dec 2001.
This email is also subject to copyright. Any use of or reliance upon this material by persons or entities other than the addressee is prohibited.
E-mails may be interfered with, may contain computer viruses or other defects. Under no circumstances do we accept liability for any loss or damage which may result from your receipt of this message or any attachments. **** END OF MESSAGE ****