This KB solves the problem NetApp Knowledgebase - SnapDrive for UNIX fails with error: Aggregate not assigned for the storage system

On Monday, March 30, 2015 5:29 PM, Iluhes iluhes@yahoo.com wrote:

Checking if this applies https://kb.netapp.com/support/index?page=content&id=2018144

On Monday, March 30, 2015 5:25 PM, Iluhes iluhes@yahoo.com wrote:

I have FC SVM and trying to setup a snapdrive and not able to do it     security login create -username snapdrive -application ontapi -authmethod password -role vsadmin -vserver san1     network interface create -vserver san1 -lif san1-lif -firewall-policy mgmt -address 10.10.10.10 -netmask 255.255.255.0 -role data -data-protocol none -home-node NETAPP1 -home-port e0j

snapdrive config set snapdrive san1        Password for snapdrive: Retype password: 0003-400 Admin error: Aggregate not assigned for the storage system: san1

thanks!! That is exactly what did it!!!

On Mar 30, 2015, at 5:34 PM, Jeff Bryer bryer@sfu.ca wrote:

Sound like delegating volume creation wasn't set up (it's not by default).

vserver modify -vserver <SVM> -aggr-list <aggr to allow volume creation>

----- Original Message ----- From: "Iluhes" iluhes@yahoo.com To: "Toasters" toasters@teaparty.net Sent: Monday, March 30, 2015 3:25:10 PM Subject: snapdirve and cluster OS...how to connect to storage system

I have FC SVM and trying to setup a snapdrive and not able to do it

security login create -username snapdrive -application ontapi -authmethod password -role vsadmin -vserver san1 network interface create -vserver san1 -lif san1-lif -firewall-policy mgmt -address 10.10.10.10 -netmask 255.255.255.0 -role data -data-protocol none -home-node NETAPP1 -home-port e0j

snapdrive config set snapdrive san1 Password for snapdrive: Retype password: 0003-400 Admin error: Aggregate not assigned for the storage system: san1

---

Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters