We are running a 3020 cluster and need to do maintenance on one side of the cluster (filer head and disk shelves). Can we unplug loop B from the other cluster member while it is running? We only need it to service its loop A during the maintenance window.
Thanks
Suresh
Can we unplug loop B from the other cluster member while it is
running?
If you pull the B-Loop cable to the other node while CF is enabled, no failover occurs and CF disables. If you plug it back in, CF enables automatically.
Dave Rubright Jr
4Base Technology
________________________________
From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Suresh Rajagopalan Sent: Thursday, April 26, 2007 9:54 AM To: toasters@mathworks.com Subject: Hot-remove loop B
We are running a 3020 cluster and need to do maintenance on one side of the cluster (filer head and disk shelves). Can we unplug loop B from the other cluster member while it is running? We only need it to service its loop A during the maintenance window.
Thanks
Suresh
-
Dave Rubright -
Suresh Rajagopalan