Right on the button. I'm not clear on why the date would have been hosed replacing a DIMM, but that appears to be exactly what happened. It got set to 9/5/05 00:00:00 GMT.
Wow. I feel a little silly for not even thinking to check that. Thanks for the advice without ", moron" attached at the end. :)
-bmr
On 15:39 Thu 20 Sep , Dave Barr (????) wrote:
Check the time (clock) on your filers. I bet -02's clock is way off.
--Dave
On 9/20/07, Brett Rabe brett@uswest.net wrote:
Howdy. Trivial question for y'all.
I have two FAS3040 heads (-01 and -02) in an HA configuration.
I have one FAS3040 head (-03) to which both of these are mirroring their data (every 5 minutes). The following is the status output on the backup toaster:
mpls-toaster-03> snapmirror status Snapmirror is on. Source Destination State Lag Status mpls-toaster-01-priv:vol1 mpls-toaster-03:vol1 Snapmirrored 00:04:28 Idle mpls-toaster-02-priv:vol1 mpls-toaster-03:vol2 Snapmirrored 17895:54:16 Idle
It all works just fine.
I'm curious about the Lag time. What exactly does that mean? Why is it "17895:54:16"? It appeared that way after I did a failover of -02 (to -01) for the purposes of replacing a DIMM. Brought it back, did the giveback, and everything is working fine.
The mirroring still seems to be working just great ... this is more of a curiosity question than anything, I guess.
-bmr
Remember: NTP is your friend!
-----Original Message----- From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Brett Rabe Sent: Thursday, September 20, 2007 7:17 PM To: toasters@mathworks.com Subject: Re: snapmirror status / lag
Right on the button. I'm not clear on why the date would have been hosed replacing a DIMM, but that appears to be exactly what happened. It got set to 9/5/05 00:00:00 GMT.
Wow. I feel a little silly for not even thinking to check that. Thanks for the advice without ", moron" attached at the end. :)
-bmr
On 15:39 Thu 20 Sep , Dave Barr (????) wrote:
Check the time (clock) on your filers. I bet -02's clock is way off.
--Dave
On 9/20/07, Brett Rabe brett@uswest.net wrote:
Howdy. Trivial question for y'all.
I have two FAS3040 heads (-01 and -02) in an HA configuration.
I have one FAS3040 head (-03) to which both of these are mirroring their data (every 5 minutes). The following is the status output on the backup toaster:
mpls-toaster-03> snapmirror status Snapmirror is on. Source Destination State Lag
Status
mpls-toaster-01-priv:vol1 mpls-toaster-03:vol1 Snapmirrored
00:04:28 Idle
mpls-toaster-02-priv:vol1 mpls-toaster-03:vol2 Snapmirrored
17895:54:16 Idle
It all works just fine.
I'm curious about the Lag time. What exactly does that mean? Why is it "17895:54:16"? It appeared that way after I did a failover of -02 (to -01) for the purposes of replacing a DIMM. Brought it back, did the giveback, and everything is working fine.
The mirroring still seems to be working just great ... this is more of a curiosity question than anything, I guess.
-bmr
-
Brett Rabe -
Glenn Walker