Is anybody using GB in a 740 Filer?
The config on now says I can use a X1027B but somebody told me this card doesn't work??
Is anybody using GB in a 740 Filer?
Yup. Works pretty good actually. slot 8: Gigabit Ethernet Controller II e8 MAC Address: 00:90:27:xx:xx:xx (auto-1000sx-fd-up) Device Type: Rev 3 memory mapped I/O base 0x84000000, size 0x20000
The config on now says I can use a X1027B but somebody told me this card doesn't work??
Anything specifically wrong with it ? maybe it was connected to a Dell powerconnect switch....
/dev/null
devnull@adc.idt.com
X1025B is optical (sysconfig GigE II) The X1027 is the copper card for F700 series (sysconfig GigE III) There are plenty of these cards available.
Also, X1027B is a copper, for F800 and above
July ----- Original Message ----- From: devnull@adc.idt.com To: "Arlington, Tom" Tom.Arlington@StrategIT.com Cc: toasters@mathworks.com Sent: Thursday, September 23, 2004 10:41 AM Subject: Re: GB card in a 740 Filer
Is anybody using GB in a 740 Filer?
Yup. Works pretty good actually. slot 8: Gigabit Ethernet Controller II e8 MAC Address: 00:90:27:xx:xx:xx (auto-1000sx-fd-up) Device Type: Rev 3 memory mapped I/O base 0x84000000, size 0x20000
The config on now says I can use a X1027B but somebody told me this card doesn't work??
Anything specifically wrong with it ? maybe it was connected to a Dell powerconnect switch....
/dev/null
devnull@adc.idt.com
Does anybody have any specific or anecdotal information comparing the performance of FC9 disk shelves vs. DS14 disk shelves populated with 72gb drives?
-
Arlington, Tom -
devnull＠adc.idt.com -
July＠Zerowait -
Scott Fischmann