I know it's not quite as good, but are you aware that you can slip a piece of paper into the clear plastic near the LCD panel? There's a piece of clear plastic on the bezel that covers the LCD, and also covers a small area of bezel plastic *under* the LCD. If you take the bezel off, you can then slip a piece of paper in the area from the back of the bezel.

It's not as good as doing it through software, but it's probably better than a sticky label or something taped on the outside (that will invariably get knocked off or messed up in some other way).

(on 700 and 800 series machines)

Brad.

-----Original Message----- From: Jay Soffian

Is there any way to display the filer hostname on the LCD panel on the F700/F800 filers running DOT 5.3.5R2 and above? If not, is there any way I can force my own message via an rc_toggle_basic command?

(I'm aware of the various led_FOO commands, but these all appear to be to manipulate the shelf LED's, not the head display LED).