Folks,I have situation that SP firmware was upgraded after just "Get" of softwaresystem node image get -node * -package http:// and nothing else. It caused the SP to upgrade and watchdog reset some nodes as well.Is there a reason for that?Anyone ever come across this issue.
What platform? what was the original release? did you read the upgrade info?
There were situations, if I recall, that dictated a specific way to upgrade and in some instances, you could not skip release and certain releases are tied to certain releases of ONTAP.
--tmac
*Tim McCarthy, **Principal Consultant*
On Wed, May 11, 2016 at 8:10 AM, Iluhes iluhes@yahoo.com wrote:
Folks, I have situation that SP firmware was upgraded after just "Get" of software system node image get -node * -package http:// and nothing else. It caused the SP to upgrade and watchdog reset some nodes as well. Is there a reason for that? Anyone ever come across this issue.
Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters
Only downloading via "get" of sp formware. It is 8040/8020 and it look like it auto upgrade to 3.1.2 from 3.1P1...and it watchdog reset few nodes. Wild, no?
On May 11, 2016, at 8:31 AM, tmac tmacmd@gmail.com wrote:
What platform? what was the original release? did you read the upgrade info?
There were situations, if I recall, that dictated a specific way to upgrade and in some instances, you could not skip release and certain releases are tied to certain releases of ONTAP.
--tmac
Tim McCarthy, Principal Consultant
On Wed, May 11, 2016 at 8:10 AM, Iluhes iluhes@yahoo.com wrote: Folks, I have situation that SP firmware was upgraded after just "Get" of software system node image get -node * -package http:// and nothing else. It caused the SP to upgrade and watchdog reset some nodes as well. Is there a reason for that? Anyone ever come across this issue.
Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters
what version of ONTAP?
--tmac
*Tim McCarthy, **Principal Consultant*
On Wed, May 11, 2016 at 10:30 AM, Iluhes iluhes@yahoo.com wrote:
Only downloading via "get" of sp formware. It is 8040/8020 and it look like it auto upgrade to 3.1.2 from 3.1P1...and it watchdog reset few nodes. Wild, no?
On May 11, 2016, at 8:31 AM, tmac tmacmd@gmail.com wrote:
What platform? what was the original release? did you read the upgrade info?
There were situations, if I recall, that dictated a specific way to upgrade and in some instances, you could not skip release and certain releases are tied to certain releases of ONTAP.
--tmac
*Tim McCarthy, **Principal Consultant*
On Wed, May 11, 2016 at 8:10 AM, Iluhes iluhes@yahoo.com wrote:
Folks, I have situation that SP firmware was upgraded after just "Get" of software system node image get -node * -package http:// and nothing else. It caused the SP to upgrade and watchdog reset some nodes as well. Is there a reason for that? Anyone ever come across this issue.
Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters
8.3
On May 11, 2016, at 9:32 AM, tmac tmacmd@gmail.com wrote:
what version of ONTAP?
--tmac
Tim McCarthy, Principal Consultant
On Wed, May 11, 2016 at 10:30 AM, Iluhes iluhes@yahoo.com wrote: Only downloading via "get" of sp formware. It is 8040/8020 and it look like it auto upgrade to 3.1.2 from 3.1P1...and it watchdog reset few nodes. Wild, no?
On May 11, 2016, at 8:31 AM, tmac tmacmd@gmail.com wrote:
What platform? what was the original release? did you read the upgrade info?
There were situations, if I recall, that dictated a specific way to upgrade and in some instances, you could not skip release and certain releases are tied to certain releases of ONTAP.
--tmac
Tim McCarthy, Principal Consultant
On Wed, May 11, 2016 at 8:10 AM, Iluhes iluhes@yahoo.com wrote: Folks, I have situation that SP firmware was upgraded after just "Get" of software system node image get -node * -package http:// and nothing else. It caused the SP to upgrade and watchdog reset some nodes as well. Is there a reason for that? Anyone ever come across this issue.
Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters
Sounds like maybe you hit this.... http://mysupport.netapp.com/NOW/cgi-bin/bol?Type=Detail&Display=876776
SP firmware upgrade initiated by Data ONTAP can sometimes result in the SP issuing NMI and L2 watchdog reset, resulting in Data ONTAP reboot
When Data ONTAP automatically updates the Service Processor (SP) firmware from most of earlier releases to Data ONTAP 8.3.1, there is a possibility that the SP incorrectly triggers the watchdog and reboots Data ONTAP. This issue might occur on all platforms.
--tmac
*Tim McCarthy, **Principal Consultant*
On Wed, May 11, 2016 at 10:49 AM, Iluhes iluhes@yahoo.com wrote:
8.3
On May 11, 2016, at 9:32 AM, tmac tmacmd@gmail.com wrote:
what version of ONTAP?
--tmac
*Tim McCarthy, **Principal Consultant*
On Wed, May 11, 2016 at 10:30 AM, Iluhes iluhes@yahoo.com wrote:
Only downloading via "get" of sp formware. It is 8040/8020 and it look like it auto upgrade to 3.1.2 from 3.1P1...and it watchdog reset few nodes. Wild, no?
On May 11, 2016, at 8:31 AM, tmac tmacmd@gmail.com wrote:
What platform? what was the original release? did you read the upgrade info?
There were situations, if I recall, that dictated a specific way to upgrade and in some instances, you could not skip release and certain releases are tied to certain releases of ONTAP.
--tmac
*Tim McCarthy, **Principal Consultant*
On Wed, May 11, 2016 at 8:10 AM, Iluhes iluhes@yahoo.com wrote:
Folks, I have situation that SP firmware was upgraded after just "Get" of software system node image get -node * -package http:// and nothing else. It caused the SP to upgrade and watchdog reset some nodes as well. Is there a reason for that? Anyone ever come across this issue.
Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters
Thank you! I am lost by that KB. What does it mean?>= DATA ONTAP upgrade SP firware from most of earlier relases to DATA ONTAP 8.3.1What is being upgraed? ONTAP or SP?And all we did is issue "Get" on SP firmware...The KB, the way is worded, I dont understand....What is a sequience of events or condition When Data ONTAP automatically updates the Service Processor (SP) firmware from most of earlier releases to Data ONTAP 8.3.1, there is a possibility that the SP incorrectly triggers the watchdog and reboots Data ONTAP. This issue might occur on all platforms.
On Wednesday, May 11, 2016 9:55 AM, tmac tmacmd@gmail.com wrote:
Sounds like maybe you hit this....http://mysupport.netapp.com/NOW/cgi-bin/bol?Type=Detail&Display=876776
| SP firmware upgrade initiated by Data ONTAP can sometimes result in the SP issuing NMI and L2 watchdog reset, resulting in Data ONTAP reboot | |
When Data ONTAP automatically updates the Service Processor (SP) firmware from most of earlier releases to Data ONTAP 8.3.1, there is a possibility that the SP incorrectly triggers the watchdog and reboots Data ONTAP. This issue might occur on all platforms.
--tmac Tim McCarthy, Principal Consultant
On Wed, May 11, 2016 at 10:49 AM, Iluhes iluhes@yahoo.com wrote:
8.3 On May 11, 2016, at 9:32 AM, tmac tmacmd@gmail.com wrote:
what version of ONTAP? --tmac Tim McCarthy, Principal Consultant
On Wed, May 11, 2016 at 10:30 AM, Iluhes iluhes@yahoo.com wrote:
Only downloading via "get" of sp formware. It is 8040/8020 and it look like it auto upgrade to 3.1.2 from 3.1P1...and it watchdog reset few nodes. Wild, no? On May 11, 2016, at 8:31 AM, tmac tmacmd@gmail.com wrote:
What platform? what was the original release? did you read the upgrade info? There were situations, if I recall, that dictated a specific way to upgrade and in some instances, you could not skip release and certain releases are tied to certain releases of ONTAP.
--tmac Tim McCarthy, Principal Consultant
On Wed, May 11, 2016 at 8:10 AM, Iluhes iluhes@yahoo.com wrote:
Folks,I have situation that SP firmware was upgraded after just "Get" of softwaresystem node image get -node * -package http:// and nothing else. It caused the SP to upgrade and watchdog reset some nodes as well.Is there a reason for that?Anyone ever come across this issue. _______________________________________________ Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters
Basically, if you are running *any* version of ONTAP before 8.3.1, you may (or may not) hit this bug when the Service-Processor is automatically updated:
shahqnetapp::> system service-processor show -fields autoupdate-enabled node autoupdate-enabled ---------------- ------------------ shanetapp8020-01 true shanetapp8020-02 true shanetapp8060-03 true shanetapp8060-04 true
In most systems, this is set to true. When Data ONTAP sees a newer SP_FW.zip file is available on the system, it will attempt to automatically upgrade the SP. There is communication between ONTAP and the SP to direct ONTAP to initiate the SP upgrade.
Does that help?
--tmac
*Tim McCarthy, **Principal Consultant*
On Wed, May 11, 2016 at 11:46 AM, Iluhes iluhes@yahoo.com wrote:
Thank you! I am lost by that KB. What does it mean?>= DATA ONTAP upgrade SP firware from most of earlier relases to DATA ONTAP 8.3.1 What is being upgraed? ONTAP or SP? And all we did is issue "Get" on SP firmware...The KB, the way is worded, I dont understand....What is a sequience of events or condition
When Data ONTAP automatically updates the Service Processor (SP) firmware from most of earlier releases to Data ONTAP 8.3.1, there is a possibility that the SP incorrectly triggers the watchdog and reboots Data ONTAP. This issue might occur on all platforms.
On Wednesday, May 11, 2016 9:55 AM, tmac tmacmd@gmail.com wrote:
Sounds like maybe you hit this.... http://mysupport.netapp.com/NOW/cgi-bin/bol?Type=Detail&Display=876776
SP firmware upgrade initiated by Data ONTAP can sometimes result in the SP issuing NMI and L2 watchdog reset, resulting in Data ONTAP reboot
When Data ONTAP automatically updates the Service Processor (SP) firmware from most of earlier releases to Data ONTAP 8.3.1, there is a possibility that the SP incorrectly triggers the watchdog and reboots Data ONTAP. This issue might occur on all platforms.
--tmac
*Tim McCarthy, **Principal Consultant*
On Wed, May 11, 2016 at 10:49 AM, Iluhes iluhes@yahoo.com wrote:
8.3
On May 11, 2016, at 9:32 AM, tmac tmacmd@gmail.com wrote:
what version of ONTAP?
--tmac
*Tim McCarthy, **Principal Consultant*
On Wed, May 11, 2016 at 10:30 AM, Iluhes iluhes@yahoo.com wrote:
Only downloading via "get" of sp formware. It is 8040/8020 and it look like it auto upgrade to 3.1.2 from 3.1P1...and it watchdog reset few nodes. Wild, no?
On May 11, 2016, at 8:31 AM, tmac tmacmd@gmail.com wrote:
What platform? what was the original release? did you read the upgrade info?
There were situations, if I recall, that dictated a specific way to upgrade and in some instances, you could not skip release and certain releases are tied to certain releases of ONTAP.
--tmac
*Tim McCarthy, **Principal Consultant*
On Wed, May 11, 2016 at 8:10 AM, Iluhes iluhes@yahoo.com wrote:
Folks, I have situation that SP firmware was upgraded after just "Get" of software system node image get -node * -package http:// and nothing else. It caused the SP to upgrade and watchdog reset some nodes as well. Is there a reason for that? Anyone ever come across this issue.
Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters
Tim,Briliant! Thank you for clarifying....Terrible setting to have in place, and I found the wrong way....auto-update!!!
On Wednesday, May 11, 2016 10:51 AM, tmac tmacmd@gmail.com wrote:
Basically, if you are running *any* version of ONTAP before 8.3.1, you may (or may not) hit this bug when the Service-Processor is automatically updated: shahqnetapp::> system service-processor show -fields autoupdate-enablednode autoupdate-enabled---------------- ------------------shanetapp8020-01 trueshanetapp8020-02 trueshanetapp8060-03 trueshanetapp8060-04 true
In most systems, this is set to true. When Data ONTAP sees a newer SP_FW.zip file is available on the system, it will attempt to automatically upgrade the SP. There is communication between ONTAP and the SP to direct ONTAP to initiate the SP upgrade. Does that help?
--tmac Tim McCarthy, Principal Consultant
On Wed, May 11, 2016 at 11:46 AM, Iluhes iluhes@yahoo.com wrote:
Thank you! I am lost by that KB. What does it mean?>= DATA ONTAP upgrade SP firware from most of earlier relases to DATA ONTAP 8.3.1What is being upgraed? ONTAP or SP?And all we did is issue "Get" on SP firmware...The KB, the way is worded, I dont understand....What is a sequience of events or condition When Data ONTAP automatically updates the Service Processor (SP) firmware from most of earlier releases to Data ONTAP 8.3.1, there is a possibility that the SP incorrectly triggers the watchdog and reboots Data ONTAP. This issue might occur on all platforms.
On Wednesday, May 11, 2016 9:55 AM, tmac tmacmd@gmail.com wrote:
Sounds like maybe you hit this....http://mysupport.netapp.com/NOW/cgi-bin/bol?Type=Detail&Display=876776
| SP firmware upgrade initiated by Data ONTAP can sometimes result in the SP issuing NMI and L2 watchdog reset, resulting in Data ONTAP reboot | |
When Data ONTAP automatically updates the Service Processor (SP) firmware from most of earlier releases to Data ONTAP 8.3.1, there is a possibility that the SP incorrectly triggers the watchdog and reboots Data ONTAP. This issue might occur on all platforms.
--tmac Tim McCarthy, Principal Consultant
On Wed, May 11, 2016 at 10:49 AM, Iluhes iluhes@yahoo.com wrote:
8.3 On May 11, 2016, at 9:32 AM, tmac tmacmd@gmail.com wrote:
what version of ONTAP? --tmac Tim McCarthy, Principal Consultant
On Wed, May 11, 2016 at 10:30 AM, Iluhes iluhes@yahoo.com wrote:
Only downloading via "get" of sp formware. It is 8040/8020 and it look like it auto upgrade to 3.1.2 from 3.1P1...and it watchdog reset few nodes. Wild, no? On May 11, 2016, at 8:31 AM, tmac tmacmd@gmail.com wrote:
What platform? what was the original release? did you read the upgrade info? There were situations, if I recall, that dictated a specific way to upgrade and in some instances, you could not skip release and certain releases are tied to certain releases of ONTAP.
--tmac Tim McCarthy, Principal Consultant
On Wed, May 11, 2016 at 8:10 AM, Iluhes iluhes@yahoo.com wrote:
Folks,I have situation that SP firmware was upgraded after just "Get" of softwaresystem node image get -node * -package http:// and nothing else. It caused the SP to upgrade and watchdog reset some nodes as well.Is there a reason for that?Anyone ever come across this issue. _______________________________________________ Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters
-
Iluhes -
tmac