very good question...Alexander,

earlier we were using only 2 ports, leaving other 2 ports keeping idle, so we are configuring other 2 ports and configuring LACP out of it,,,as of now do not have any plan to use any other vlan id's other than 608, ,which is already functional in the interface group as a0a, so now that same vlan id can be used for the new interface group a0b...? will that create any outage (since i am not getting vlan add..options similar to 7mode)...

Regards Raj,

On Fri, Mar 8, 2019 at 3:54 PM Alexander Griesser AGriesser@anexia-it.com wrote:

Hey,

why do you want to have the same VLAN on two different interface groups?

*Alexander Griesser*

Head of Systems Operations

ANEXIA Internetdienstleistungs GmbH

E-Mail: AGriesser@anexia-it.com

Web: http://www.anexia-it.com

Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt

Geschäftsführer: Alexander Windbichler

Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601

*From:* toasters-bounces@teaparty.net toasters-bounces@teaparty.net *On Behalf Of *Yuvaraja Shivaram *Sent:* Friday, March 8, 2019 11:22 AM *To:* toasters toasters@teaparty.net *Subject:* please provide the complete steps for creating new lacp ports..

Hi All,

Is there any way to add vlan to existing vlan-id, just how we do at 7mode...

curretly we are using 9.4p1 cmode....

below vlan already exists....so now if i want to create a0b for the same vlan id 608, am not getting vlan add here, so..

if i use ,network port vlan create -node cluster-01 -vlan-name a0b-608... is there any outage to this id 608, which is already running in production...?

Network Network

Node VLAN Name Port VLAN ID MAC Address

---

cluster-01

   a0a-608

             a0a     608      xxxx

cluster-02

   a0a-608

             a0a     608     xxxx

Why not add the other 2 ports to your existing a0a ifgrp?

To answer your question, if you have already created your a0b ifgrp, adding a vlan (vlan create a0b-608) is non-disruptive.

From: toasters-bounces@teaparty.net toasters-bounces@teaparty.net On Behalf Of Yuvaraja Shivaram Sent: 08 March 2019 10:36 To: Alexander Griesser AGriesser@anexia-it.com Cc: toasters toasters@teaparty.net Subject: Re: please provide the complete steps for creating new lacp ports..

very good question...Alexander,

earlier we were using only 2 ports, leaving other 2 ports keeping idle, so we are configuring other 2 ports and configuring LACP out of it,,,as of now do not have any plan to use any other vlan id's other than 608, ,which is already functional in the interface group as a0a, so now that same vlan id can be used for the new interface group a0b...? will that create any outage (since i am not getting vlan add..options similar to 7mode)...

Regards Raj,

On Fri, Mar 8, 2019 at 3:54 PM Alexander Griesser <AGriesser@anexia-it.commailto:AGriesser@anexia-it.com> wrote: Hey,

why do you want to have the same VLAN on two different interface groups?

Alexander Griesser Head of Systems Operations

ANEXIA Internetdienstleistungs GmbH

E-Mail: AGriesser@anexia-it.commailto:AGriesser@anexia-it.com Web: http://www.anexia-it.comhttp://www.anexia-it.com/

Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601

From: toasters-bounces@teaparty.netmailto:toasters-bounces@teaparty.net <toasters-bounces@teaparty.netmailto:toasters-bounces@teaparty.net> On Behalf Of Yuvaraja Shivaram Sent: Friday, March 8, 2019 11:22 AM To: toasters <toasters@teaparty.netmailto:toasters@teaparty.net> Subject: please provide the complete steps for creating new lacp ports..

Hi All,

Is there any way to add vlan to existing vlan-id, just how we do at 7mode...

curretly we are using 9.4p1 cmode....

below vlan already exists....so now if i want to create a0b for the same vlan id 608, am not getting vlan add here, so..

if i use ,network port vlan create -node cluster-01 -vlan-name a0b-608... is there any outage to this id 608, which is already running in production...?

Network Network Node VLAN Name Port VLAN ID MAC Address ------ --------- ------- -------- ----------------- cluster-01 a0a-608 a0a 608 xxxx cluster-02 a0a-608 a0a 608 xxxx

This email is being sent by a subsidiary of Arthur J. Gallagher Holdings (UK) Limited, part of the Arthur J. Gallagher & Co. global group of companies. For details of the registered office, company number and, where applicable, regulated status of our subsidiaries, please visit https://www.ajginternational.com/legal-regulatory-information/.

We are the data controller of any personal information you provide to us or personal information that has been provided to us by a third party. We collect and process information about you in order to arrange insurance policies and to process claims. Your information is also used for business purposes such as fraud prevention and detection and financial management. This may involve sharing your information with third parties such as insurers, reinsurers, other brokers, claims handlers, loss adjusters, credit reference agencies, service providers, professional advisors, our regulators, police and government agencies or fraud prevention agencies.

We may record telephone calls to help us monitor and improve the service we provide. For further information on how your information is used and your rights in relation to your information please see our privacy notice at https://www.ajginternational.com/Privacy-Policy/. If you are providing personal data of another individual to us, you must tell them you are providing their information to us and show them a copy of this notice.

Where you are obtaining a non-consumer policy of (re)insurance, or cover for additional risks or renewal under an existing policy, you are required to make a fair presentation of the risk to a (re)insurer which discloses every material circumstance which you know or ought to know relating to the risk to be insured. A circumstance is material if it would influence the judgment of a prudent insurer in determining whether to provide insurance for the risk and, if so, on what terms. Disclosure must be reasonably clear and accessible to a prudent insurer and made in good faith. The aforementioned duty of disclosure is the applicable duty under the laws of England and Wales. If your policy is not subject to English law you are expected to disclose risk information in accordance with the requirements of the applicable law. In such circumstances we expect you will disclose risk information at least equal to the standard required under English law and where the applicable law requires you to disclose information over and above the level required under English law you will provide such information in accordance with that law.

Where you are obtaining a consumer policy of insurance, you must read each question and answer honestly and fully and must take reasonable care to not make a misrepresentation.

Failure to comply with the above disclosure requirements, as they apply to you, could mean that your policy of (re)insurance is void, its terms are materially altered or that (re)insurers are not liable to pay all or part of your claim(s). If you are in any doubt as to your obligations you should ask your usual contact.

This e-mail and any attachments are CONFIDENTIAL and may contain legally privileged information. If you are not the intended recipient of this e-mail message, please telephone or e-mail us immediately, delete this message from your system and do not read, copy, distribute, disclose or otherwise use this e-mail message and any attachments. Although the above company has taken reasonable precautions to ensure this e-mail and any attachments are free of any virus or other defect that may affect your computer, it is the responsibility of the recipient to ensure that it is virus free and the above company does not accept any responsibility for any loss or damage arising in any way from its use.