Chris,

This is a common error on the F760 motherboards. This error means that the NVRAM of your onboard FC controller is bad. If you are using a PCI card at this point, you can ignore the error. We always fix these errors by replacing the motherboard, but you really don't have to if you aren't using the onboard FC controller.

Hope this helps, Timothy Naple

tnaple@berkcom.com 510-644-1599 VOICE 510-644-1598 FAX 888-812-9040 TOLL-FREE

Berkeley Communications Corporation 2990 San Pablo Avenue Berkeley, CA 94702 http://www.berkcom.com

-----Original Message----- From: Chris Miles [mailto:chris@psychofx.com] Sent: Thursday, July 25, 2002 7:33 AM To: toasters@mathworks.com Subject: Unrecognized NVRAM signature...

One of my F760 filers spits this out on bootup:

Thu Jan 1 00:00:00 GMT [ispfc_init_0:error]: Unrecognized NVRAM signature on Fibre Channel adapter 0a. Thu Jan 1 00:00:00 GMT [ispfc_init_0:error]: Invalid WWN of Fibre Channel adapter 0a. Assigning temporary default 0:000:0a0000:081c0e.

Although everything still works fine. Should I worry?

Regards, CM