hi /dev/null,

yes it's possible, all supported Disk Types with Blocksize (512/520) are contained in /etc/qual_devices.

you cannot add a line at the /etc/qual_devices.

regards

Soeren

-----Ursprungliche Nachricht----- Von: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com]Im Auftrag von devnull@adc.idt.com Gesendet: Donnerstag, 23. Dezember 2004 21:32 An: NetApp Toasters List Betreff: Replacing FC9 disk + adding NetApp disk label

I just had a NetApp disk on an F740 fail on me. The disk is a

X231_ST336704FC

which is a 36Gb seagate drive. I dont have support on this filer and am looking at options to replace it.

Does anyone know if it is possible to add a regular(and by that i mean a disk that isnt "formatted" for a NetApp) 36GB FC drive to the filer and get it to recognize it ?

I had a FC drive on a Sun blade fail me on me sometime back and i was able to buy a non sun drive and during the installation solaris labels the drive for me.

Is there something similar that can be done on the NetApp.

Thanks,

/dev/null

devnull@adc.idt.com