I also see that connection terminations. I think you should decrease the cache time to avoid "too less" communication with the DC. Kind Regards Stefan Holzwarth

-----Ursprüngliche Nachricht----- Von: Kumar, Rahul [mailto:rahul.kumar@eds.com] Gesendet: Mittwoch, 30. April 2003 08:08 An: Michael Schipp; toasters@mathworks.com Betreff: RE: CIFSDispatcher Error

Is there ay way to increase the cache time on filer

Shd I enable opslock for cifs shares

Rahul

-----Original Message----- From: Michael Schipp [mailto:mschipp@asi.com.au] Sent: Wednesday, April 30, 2003 11:35 AM To: Kumar, Rahul; 'toasters@mathworks.com' Subject: RE: CIFSDispatcher Error

From the NOW site.

------------------------------------------------------------------------ ----

Answered

You can expect this from the filer. It is mostly due to idle timeouts between the Filer and it's authenticating DC. I would say it is most like ( by default ) a 15 minute drop after the last need to authenticate ( like a new logon, or new cifs share connect that isn't cached )

Thank you Michael A Schipp ASI Solutions IT LAN/WAN Administrator Phone : 02 9384 8095 Mobile : 0402 907 928 E-Mail : mschipp@asi.com.au Visit us at http://www.asi.com.au

-----Original Message----- From: Kumar, Rahul [mailto:rahul.kumar@eds.com] Sent: Wednesday, 30 April 2003 2:14 PM To: toasters@mathworks.com Subject: CIFSDispatcher Error

Fellow Toasters,

On one of the F820, running Ontap 6.3.1R1 we are seeing lots of

[CIFSDispatcher:info]: Connection with \DC terminated [CIFSAuthen:info]: Connection with DC \DC established [CIFSDispatcher:info]: Connection with \DC terminated [CIFSAuthen:info]: Connection with DC \DC established [CIFSDispatcher:info]: Connection with \DC terminated [CIFSAuthen:info]: Connection with DC \DC established [CIFSDispatcher:info]: Connection with \DC terminated

We have reset the machine account in win2k nativemode domain a few times but it doesn't seem to be helping. This error is not being seen on our 3 other filers

Regards Rahul

**** ASI Solutions Disclaimer **** The material transmitted may contain confidential and/or privileged material and is intended only for the addressee. If you receive this in error, please notify the sender and destroy any copies of the material immediately. ASI will protect your Privacy according to the 10 Privacy Principles outlined under the new Privacy Act, Dec 2001.

This email is also subject to copyright. Any use of or reliance upon this material by persons or entities other than the addressee is prohibited.

E-mails may be interfered with, may contain computer viruses or other defects. Under no circumstances do we accept liability for any loss or damage which may result from your receipt of this message or any attachments. **** END OF MESSAGE ****