Hi,
I've now updated qual_devices and installed the most recent disk firmware files; hammer did not find any issue, disk maint found two failed disk, the others seem to be good. Also, for whatever reason, running `disk_fw_update` with the latest files installed succeeded in installing the firmware on all of the 4321 disks, so it looks good now.
Thanks!
Alexander Griesser Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail: AGriesser@anexia-it.com Web: http://www.anexia-it.com
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt Geschäftsführer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
-----Ursprüngliche Nachricht----- Von: John Clear [mailto:jac@panix.com] Gesendet: Donnerstag, 12. November 2015 00:32 An: Alexander Griesser AGriesser@anexia-it.com Betreff: Re: How to verify the health of all disks?
Since it is an empty filer, you might be able to use qual_devices to fake out the system enough to let you update the firmware. I've never run into the 4321 bug, but qual_devices is what tells the filer about what kind of disks it has. I've seen issues before where the qual_devices files weren't updated and that caused new disks to not be recognized.
John
On Wed, Nov 11, 2015 at 10:42:48AM +0000, Alexander Griesser wrote:
Hi,
the disks which are showing 4321 as revision won't update, all other disks got updated perfectly fine. I've upgraded the HA pair to 8.1.4P9 (which is the latest support on this platform, AFAIK). Any idea how I can force the disk firmware update on those disks? Maybe in maintenance mode?
Alexander Griesser Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail: AGriesser@anexia-it.commailto:AGriesser@anexia-it.com Web: http://www.anexia-it.comhttp://www.anexia-it.com/
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstra?e 140, 9020 Klagenfurt Gesch?ftsf?hrer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
Von: andrei.borzenkov@ts.fujitsu.com [mailto:andrei.borzenkov@ts.fujitsu.com] Gesendet: Mittwoch, 11. November 2015 11:41 An: Alexander Griesser AGriesser@anexia-it.com; toasters@teaparty.net Betreff: RE: How to verify the health of all disks?
You need to update drive firmware before continuing (probably in conjunction with DOT upgrade). See http://mysupport.netapp.com/NOW/cgi-bin/bol?Type=Detail&Display=853138.
With best regards
Andrei Borzenkov Senior system engineer FTS WEMEAI RUC RU SC TMS FOS [cid:image001.gif@01CBF835.B3FEDA90] FUJITSU Zemlyanoy Val Street, 9, 105 064 Moscow, Russian Federation Tel.: +7 495 730 62 20 ( reception) Mob.: +7 916 678 7208 Fax: +7 495 730 62 14 E-mail: Andrei.Borzenkov@ts.fujitsu.com<mailto:Andrei.Borzenkov@ts.fujitsu.com
Web: ru.fujitsu.comhttp://ts.fujitsu.com/ Company details: ts.fujitsu.com/imprinthttp://ts.fujitsu.com/imprint.html This communication contains information that is confidential, proprietary in nature and/or privileged. It is for the exclusive use of the intended recipient(s). If you are not the intended recipient(s) or the person responsible for delivering it to the intended recipient(s), please note that any form of dissemination, distribution or copying of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender and delete the original communication. Thank you for your cooperation. Please be advised that neither Fujitsu, its affiliates, its employees or agents accept liability for any errors, omissions or damages caused by delays of receipt or by any virus infection in this message or its attachments, or which may otherwise arise as a result of this e-mail transmission.
From: toasters-bounces@teaparty.netmailto:toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.net] On Behalf Of Alexander Griesser Sent: Wednesday, November 11, 2015 11:19 AM To: toasters@teaparty.netmailto:toasters@teaparty.net Subject: How to verify the health of all disks?
Hi Toasters,
I had a pretty stunning experience on a customer's used filer installation yesterday, long story short: FSA2040 with 1xDS4243 24x1TB SATA disks, had to reinitialize the whole system because controller and shelves have been procured from different sources, so there was no root volume, etc. After I figured the disk reassignment out and have wiped both filers, they both booted up with a 3 disk aggr0 raid_dp and I could start to work on it.
I then added a bunch of disks to filer #1 and continued with the configuration, until I found out, that some of the disks would not allow the firmware to be updated. The disks in question look like this:
*> disk_list DISK CHAN VENDOR PRODUCT ID REV SERIAL# HW (BLOCKS BPS) DQ
0d.11.2 SA:A NETAPP X302_WVULC01TSSM 4321 WD-WCAW30821984 ff 1953525168 512 N
Working disks look like this:
*> disk_list DISK CHAN VENDOR PRODUCT ID REV SERIAL# HW (BLOCKS BPS) DQ
0d.11.0 SA:A NETAPP X302_WVULC01TSSM NA02 WD-WCAW31217461 ff 1953525168 512 N
I've googled a bit and found out that disks showing up with REV "4321" need to be replaced, there seems to have been a series of disks in the past with this error, so what I did was I pulled one of those disks out of the filer and replaced it with another one. The system immediately started to reconstruct the now missing filesystem disk from the spare disk, when the log started to fill up about block errors on other disks during reconstruction, then about 10 minutes later, a double reconstruct was running and about 30 minutes later, the filer paniced due to multi disk failure and that's where I ended up then.
So since there was no data on the filer, I wiped it again and am now back up and running with 3 disks in aggr0 and I'm currently replacing one of the "4321" disks with another one:
*> disk replace start 0d.11.2 0d.11.3 aggr status -r Aggregate aggr0 (online, raid_dp) (block checksums) Plex /aggr0/plex0 (online, normal, active) RAID group /aggr0/plex0/rg0 (normal, block checksums)
RAID Disk Device HA SHELF BAY CHAN Pool Type RPM Used (MB/blks) Phys (MB/blks) --------- ------ ------------- ---- ---- ---- ----- -------------- -------------- dparity 0d.11.0 0d 11 0 SA:A - BSAS 7200 847555/1735794176 847884/1736466816 parity 0d.11.1 0d 11 1 SA:A - BSAS 7200 847555/1735794176 847884/1736466816 data 0d.11.2 0d 11 2 SA:A - BSAS 7200 847555/1735794176 847884/1736466816 (replacing, copy in progress) -> copy 0d.11.3 0d 11 3 SA:A - BSAS 7200 847555/1735794176 847884/1736466816 (copy 0% completed)The question now is: since the spare disks were all properly zeroed and there were no entries in the logs that would show me block errors on these disks, how can I verify, all my spare disks are really good? I'd love to run an intensive test on all the disks in order to make sure something like that doesn't happen again when I put the filer in production.
I'm very thankful for any advice in this regard. Is disk maint used for things like that?
*> disk maint list Disk maint tests available Test index: 0 Test Id: ws Test name: Write Same Test Test index: 1 Test Id: ndst Test name: NDST Test Test index: 2 Test Id: endst Test name: Extended NDST Test Test index: 3 Test Id: vt Test name: Verify Test Test index: 4 Test Id: ss Test name: Start Stop Test Test index: 5 Test Id: dt Test name: Data Integrity Test Test index: 6 Test Id: rdt Test name: Read Test Test index: 7 Test Id: pc Test name: Power Cycle Test
Thanks,
Alexander Griesser Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail: AGriesser@anexia-it.commailto:AGriesser@anexia-it.com Web: http://www.anexia-it.com
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstra?e 140, 9020 Klagenfurt Gesch?ftsf?hrer: Alexander Windbichler Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
Toasters mailing list Toasters@teaparty.net http://www.teaparty.net/mailman/listinfo/toasters
-
Alexander Griesser