It works. I've done it. Gotta check on support.
-----Original Message----- From: Page, Jeremy jeremy.page@gilbarco.com Sent: Monday, November 23, 2009 12:48 PM Cc: toasters@mathworks.com toasters@mathworks.com Subject: RE: Power change 110 to 208v without downtime
Let us know if it works :-)
________________________________
From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Kevin H. Schoener Sent: Monday, November 23, 2009 3:25 PM To: Bill Holland; Suresh Rajagopalan Cc: toasters@mathworks.com Subject: RE: Power change 110 to 208v without downtime
..shouldn't be a problem. The low-side of the Power Supply is the same for both high-side voltages. So, assuming you're plugging into a 208V power source on the "new" Power Supplies, it should work fine.
Best Regards,
Kevin
________________________________
From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Bill Holland Sent: Monday, November 23, 2009 2:59 PM To: Suresh Rajagopalan Cc: toasters@mathworks.com Subject: Re: Power change 110 to 208v without downtime
I certainly would not be brave enough to try that. Not sure what having 208 on one side and 110 on the other would do, but seems like a potential for disaster.
On Mon, Nov 23, 2009 at 2:31 PM, Suresh Rajagopalan SRajagopalan@williamoneil.com wrote:
Our filers and shelves are currently on 110v power. We'd like to switch to 208v, possibly without downtime. I'm thinking of moving each power supply one by one from 110v to 208v. Are there any issues doing it this way?
Thanks
Suresh
Please be advised that this email may contain confidential information. If you are not the intended recipient, please do not read, copy or re-transmit this email. If you have received this email in error, please notify us by email by replying to the sender and by telephone (call us collect at +1 202-828-0850) and delete this message and any attachments. Thank you in advance for your cooperation and assistance.
In addition, Danaher and its subsidiaries disclaim that the content of this email constitutes an offer to enter into, or the acceptance of, any contract or agreement or any amendment thereto; provided that the foregoing disclaimer does not invalidate the binding effect of any digital or other electronic reproduction of a manual signature that is included in any attachment to this email.
We in Engineering think this is fine and works. It's probably obvious but:
1. observe software environmental monitoring to verify both PSUs are up and running. 2. power off one PSU (using AC switch on PSU) 3. unplug from 110V and plug into 208V 4. power it back on 5. observe software environmental monitoring to verify new PSU is up and running. 6. repeat process for the other PSU 7. observe software environmental monitoring to verify both PSUs are up and running.
Brad.
From: "Learmonth, Peter" Peter.Learmonth@netapp.com Date: Mon, 23 Nov 2009 13:20:40 -0800 To: "Page, Jeremy" jeremy.page@gilbarco.com Cc: toasters@mathworks.com Subject: RE: Power change 110 to 208v without downtime
It works. I've done it. Gotta check on support.
-----Original Message----- From: Page, Jeremy jeremy.page@gilbarco.com Sent: Monday, November 23, 2009 12:48 PM Cc: toasters@mathworks.com toasters@mathworks.com Subject: RE: Power change 110 to 208v without downtime
Let us know if it works :-)
From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Kevin H. Schoener Sent: Monday, November 23, 2009 3:25 PM To: Bill Holland; Suresh Rajagopalan Cc: toasters@mathworks.com Subject: RE: Power change 110 to 208v without downtime
..shouldn't be a problem. The low-side of the Power Supply is the same for both high-side voltages. So, assuming you're plugging into a 208V power source on the "new" Power Supplies, it should work fine.
Best Regards,
Kevin
From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Bill Holland Sent: Monday, November 23, 2009 2:59 PM To: Suresh Rajagopalan Cc: toasters@mathworks.com Subject: Re: Power change 110 to 208v without downtime
I certainly would not be brave enough to try that. Not sure what having 208 on one side and 110 on the other would do, but seems like a potential for disaster.
On Mon, Nov 23, 2009 at 2:31 PM, Suresh Rajagopalan SRajagopalan@williamoneil.com wrote:
Our filers and shelves are currently on 110v power. We'd like to switch to 208v, possibly without downtime. I'm thinking of moving each power supply one by one from 110v to 208v. Are there any issues doing it this way?
Thanks
Suresh
Now that's why I like toasters.
-----Original Message----- From: Brad Reger [mailto:reger@netapp.com] Sent: Monday, November 23, 2009 5:33 PM To: Learmonth, Peter; Page, Jeremy Cc: toasters@mathworks.com Subject: Re: Power change 110 to 208v without downtime
We in Engineering think this is fine and works. It's probably obvious but:
1. observe software environmental monitoring to verify both PSUs are up and running. 2. power off one PSU (using AC switch on PSU) 3. unplug from 110V and plug into 208V 4. power it back on 5. observe software environmental monitoring to verify new PSU is up and running. 6. repeat process for the other PSU 7. observe software environmental monitoring to verify both PSUs are up and running.
Brad.
From: "Learmonth, Peter" Peter.Learmonth@netapp.com Date: Mon, 23 Nov 2009 13:20:40 -0800 To: "Page, Jeremy" jeremy.page@gilbarco.com Cc: toasters@mathworks.com Subject: RE: Power change 110 to 208v without downtime
It works. I've done it. Gotta check on support.
-----Original Message----- From: Page, Jeremy jeremy.page@gilbarco.com Sent: Monday, November 23, 2009 12:48 PM Cc: toasters@mathworks.com toasters@mathworks.com Subject: RE: Power change 110 to 208v without downtime
Let us know if it works :-)
From: owner-toasters@mathworks.com
[mailto:owner-toasters@mathworks.com]
On Behalf Of Kevin H. Schoener Sent: Monday, November 23, 2009 3:25 PM To: Bill Holland; Suresh Rajagopalan Cc: toasters@mathworks.com Subject: RE: Power change 110 to 208v without downtime
..shouldn't be a problem. The low-side of the Power Supply is the
same
for both high-side voltages. So, assuming you're plugging into a 208V power source on the "new" Power Supplies, it should work fine.
Best Regards,
Kevin
From: owner-toasters@mathworks.com
[mailto:owner-toasters@mathworks.com]
On Behalf Of Bill Holland Sent: Monday, November 23, 2009 2:59 PM To: Suresh Rajagopalan Cc: toasters@mathworks.com Subject: Re: Power change 110 to 208v without downtime
I certainly would not be brave enough to try that. Not sure what
having
208 on one side and 110 on the other would do, but seems like a potential for disaster.
On Mon, Nov 23, 2009 at 2:31 PM, Suresh Rajagopalan SRajagopalan@williamoneil.com wrote:
Our filers and shelves are currently on 110v power. We'd like to
switch
to 208v, possibly without downtime. I'm thinking of moving each power supply one by one from 110v to 208v. Are there any issues doing it
this
way?
Thanks
Suresh
Please be advised that this email may contain confidential information. If you are not the intended recipient, please do not read, copy or re-transmit this email. If you have received this email in error, please notify us by email by replying to the sender and by telephone (call us collect at +1 202-828-0850) and delete this message and any attachments. Thank you in advance for your cooperation and assistance.
In addition, Danaher and its subsidiaries disclaim that the content of this email constitutes an offer to enter into, or the acceptance of, any contract or agreement or any amendment thereto; provided that the foregoing disclaimer does not invalidate the binding effect of any digital or other electronic reproduction of a manual signature that is included in any attachment to this email.
-
Brad Reger -
Learmonth, Peter -
Page, Jeremy