I have been experimenting with SnapMirror to tape mostly for initial mirroring to a remote site. As far as I know there is no way to catalog a SnapMirror tape, and you would have to restore the whole volume not just a missing or corrupted file. Also I believe you will need ONTAP 6.1 for your configuration to work.

Steven

---------- Original Message ---------------------------------- From: "Gifford, Josh" Josh.Gifford@ptd.siemens.com Date: Mon, 27 Aug 2001 11:33:29 -0400

We have implemented a SnapMirror strategy where a small site in Atlanta is mirroring to our larger filer in our data center in Raleigh. We are doing this in place of tape backups because there is no local IT staff to switch out tapes and keep an eye on things. The mirror seems to be working fine, but I had hoped to be able to send the snap mirrored volume to tape once a week so that they could be sent off site. The problem is that the destination volume is listed as "snapmirrored," not "online" like the rest. Veritas will back up all of the other volumes, but not the snapmirrored one.

It's not a big deal because I have all of the data in two places, but it would be nice to also have a current copy of the data an underground in a vault. Let me know what you guys think my options might be or what you guys have done in these situations. Thanks!

Best Regards,

Josh J Gifford MCP Senior NT Administrator Siemens Power Transmission & Distribution 7000 Siemens Rd Wendell, NC 27591 Phone: (919) 365-2806; Fax: (919) 365-1080 Email: mailto:josh.gifford@ptd.siemens.com josh.gifford@ptd.siemens.com

-- Steven N. Boyer UNIX/NT/NetApp Support HQUSCENTCOM General Dynamics --