July @ Zerowait wrote:

Hi. Anyone ever seen output like this on booting a F700 series filer? If so, how do I get rid of it!!!?

TIA-- July

---

NetApp Release 6.2.1: Tue Jun 25 01:22:35 PDT 2002 Copyright (c) 1992-2002 Network Appliance, Inc. Starting boot on Thu Dec 26 16:56:30 GMT 2002 Thu Dec 26 16:57:09 GMT [net_e0:info]: Ethernet e0: Link up. Thu Dec 26 16:57:09 GMT [snmp.link.up:debug]: Interface 1 is up fm_run: completed stage B4ASSIM Thu Dec 26 16:57:19 GMT [fmmbx_instanceWorke:info]: Disk 7.4 is a primary mailbo x disk Thu Dec 26 16:57:19 GMT [fmmbx_instanceWorke:info]: Disk 7.3 is a primary mailbo x disk Thu Dec 26 16:57:19 GMT [fmmbx_instanceWorke:info]: normal mailbox instance on p rimary side fm_run: completed stage 1 processing Loading volume vol0 fm_run: completed stage 2 processing fm_run: completed stage 3 processing Thu Dec 26 16:57:22 GMT [rc:notice]: The system was down for 136 seconds Thu Dec 26 16:57:26 GMT [ems.engine.startReplay:info]: Replay begins for EMS boo t-time cache Thu Dec 26 16:57:26 GMT [ems.engine.endReplay:info]: Replay ends for EMS boot-ti me cache

July Linett Zerowait Corporation tel: 302.266.9408

hi, this output is normal, u can see it on every filer (F700 , F800 ..) running some 6.X ontapp system

this type (displaying some mailbox lines) has been appeared with 2nd generation of 6.X

i am not sure you can disable those messages in another hand, I personnaly appreciate this : it tells you everything is okay as far as I can see