Windows 2000 Server with SP4.

I started an rsh .... sysstat 1 and it ran for over 10 min before I manually terminated. So, it appears to be only when doing ndmpcopy via rsh. Something to do with the way ndmpcopy sends status info back every 5 min? Possibly resetting the stdout?

OnTap 7.0.3 on the R200 I am rsh'ing to. Absolutely certain there is no firewall... built this network myself. It is a one switch network dedicated to backing up all our systems to an R200 using SnapVault and Syncsort's Open System Snapvault.

-----Original Message----- From: Neil Stichbury [mailto:Neil.Stichbury@gen-i.co.nz] Sent: Tuesday, March 07, 2006 4:49 PM To: Holland, William L Subject: RE: rsh times out after 5 min

What Windows client ? If you perform other rsh activity between this box and the Filer do you still get a connection reset or is it only when using ndmpcopy? What is the DOT version? Absolutely certain the path is not via a Firewall?(ie tracert works with no hops?)

-----Original Message----- From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Holland, William L Sent: Wednesday, 8 March 2006 4:58 a.m. To: 'toasters@mathworks.com' Subject: rsh times out after 5 min

I am trying to perform an ndmpcopy operation using rsh from a Windows client. I am able to initiate the ndmpcopy fine and transfer actually starts. However, after EXACTLY 5 minutes, the rsh times out with a "connection reset by peer" message. Anyone know of any way to get around this?

This communication, including any attachments, is confidential. If you are not the intended recipient, you should not read it - please contact me immediately, destroy it, and do not copy or use any part of this communication or disclose anything about it. Thank you. Please note that this communication does not designate an information system for the purposes of the Electronic Transactions Act 2002.