Hi all, I have a serious issue with a F87. It send errors determinating that the SCSI disk on 0b.2 is broken. I replaced it but the errors appeared again. I adjusted tight every component but nothing. I wonder if someone suffer the same errors.

Errors Sun Jan 12 18:16:42 ART [adpch_timeoutd:warning]: adpch_timeoutd:

0b.0(0x01b48fb4, 0x2a:0000d570:0080): command timeout, quiescing bus to

allow outstanding I/O to complete.

Sun Jan 12 18:16:53 ART [adpch_asyncd:warning]: adpch asyncd: Resetting

SCSI 0b target 0 to clear outstanding I/O.

Sun Jan 12 18:16:58 ART [adpch_asyncd:warning]: adpch asyncd: Resetting

SCSI bus 0b to clear outstanding I/O.

Sun Jan 12 18:17:02 ART [adpch_asyncd:warning]: adpch_timeoutd: 0b:

unquiescing bus

Sun Jan 12 18:17:02 ART [scsi.cmd.pastTimeToLive:error]: Device 0b.6:

request failed after try #1: cdb 0x3c.

Sun Jan 12 18:17:02 ART [safte_admin:error]: device 0b.6 failed to read

SAF-TE slot status, error 8

Sun Jan 12 18:17:02 ART [scsi.cmd.checkCondition:error]: Device 0b.2: Check

Condition: CDB 0x2a:0000d400:0070: Sense Data not ready - (0x2 - 0x4 0x2

0x2).

Sun Jan 12 18:17:02 ART [scsi.cmd.checkCondition:error]: Device 0b.2: Check

Condition: CDB 0x2a:0000d470:0080: Sense Data not ready - (0x2 - 0x4 0x2

0x2).

Sun Jan 12 18:17:11 ART [scsi.cmd.checkCondition:error]: Device 0b.2: Check

Condition: CDB 0x2a:0000d400:0070: Sense Data not ready - (0x2 - 0x4 0x2

0x2).

Sun Jan 12 18:17:11 ART [scsi.cmd.checkCondition:error]: Device 0b.2: Check

Condition: CDB 0x2a:0000d470:0080: Sense Data not ready - (0x2 - 0x4 0x2

0x2).

Sun Jan 12 18:17:28 ART [scsi.cmd.checkCondition:error]: Device 0b.2: Check

Condition: CDB 0x2a:0000d400:0070: Sense Data not ready - (0x2 - 0x4 0x2

0x2).

Sun Jan 12 18:17:28 ART [scsi.cmd.checkCondition:error]: Device 0b.2: Check

Condition: CDB 0x2a:0000d470:0080: Sense Data not ready - (0x2 - 0x4 0x2

0x2).

Sun Jan 12 18:18:01 ART [scsi.cmd.checkCondition:error]: Device 0b.2: Check

Condition: CDB 0x2a:0000d400:0070: Sense Data not ready - (0x2 - 0x4 0x2

0x2).

Sun Jan 12 18:18:01 ART [scsi.cmd.checkCondition:error]: Device 0b.2: Check

Condition: CDB 0x2a:0000d470:0080: Sense Data not ready - (0x2 - 0x4 0x2

0x2).

Sun Jan 12 18:19:06 ART [scsi.cmd.checkCondition:error]: Device 0b.2: Check

Condition: CDB 0x2a:0000d400:0070: Sense Data not ready - (0x2 - 0x4 0x2

0x2).

Sun Jan 12 18:19:06 ART [raid.config.disk.fail:CRITICAL]:

/vol0/plex0/rg0/0b.2 (S/N 3EK21NBV00002302AGNV): disk failure detected

Sun Jan 12 18:19:06 ART [scsi.cmd.checkCondition:error]: Device 0b.2: Check

Condition: CDB 0x2a:0000d470:0080: Sense Data not ready - (0x2 - 0x4 0x2

0x2).