Steve,
The solaris command "captrans" can be used for conversion and Solaris has man pages for this command. For example, to convert pktt trace file called "e0.trc" into a snoop format, the following command works on Solaris:
captrans -f snoop e0.trc > e0.trc.snoop
Please let me know if you need man pages for "captrans". I hope that helps.
Regards, Jagan
From armijo@cs.unm.edu Fri Mar 10 15:07:59 2000 Date: Fri, 10 Mar 2000 15:59:35 -0700 From: Steve Armijo armijo@cs.unm.edu To: Jonas Jonsson jonas.jonsson@proact.se Cc: "'Steve Armijo'" armijo@cs.unm.edu, "Fox, Adam" Adam.Fox@netapp.com, toasters@mathworks.com Subject: Re: filer-side packet tracing. Mime-Version: 1.0
On Fri, Mar 10, 2000 at 11:59:30AM +0100, Jonas Jonsson wrote:
Well,
In netcache v4.1 there is a presentation of this so it is somewhat documented.
I can't say that I know the documentation of the filer side as well ;)
-----Original Message----- From: Steve Armijo [mailto:armijo@cs.unm.edu] Sent: den 10 mars 2000 10:34 To: Fox, Adam Cc: 'Ronan Mullally'; toasters@mathworks.com Subject: Re: filer-side packet tracing.
On Thu, Mar 09, 2000 at 03:18:52PM -0800, Fox, Adam wrote:
Yes. pktt will do this. It creates a file in tcpdump format, which is convertable into snoop with the right utilities.
would you folks(NetApp) be willing to share these utilities?
ok, i guess i should have been more specific. would you be willing to share the conversion utilities?
-s
-- Cue the music, fade to black, no such thing as no payback. -PWEI
[ armijo@cs.unm.edu ]
-
Jagan Bearelly