You provided no password. Try:
ndmpcopy netmmc:/vol/vol1/projects/nguc netmmc:/vol/vol2/nguc -sa root:<password-source-filer> -da root:<password-dest-filer>
The root password is the one you use to login when you telnet to the filer ...
Oliver
-----Original Message----- From: Manny Kaiser [mailto:mkaiser@mmcnet.com] Sent: Sonntag, 5. November 2000 14:38 To: toasters@mathworks.com Subject: ndmpcopy error message
I get the following error message when trying to use the ndmpcopy command (latest version 1.2) on a F840 running 5.3.6H1R2.
The command and error messages are:
ndmpcopy netmmc:/vol/vol1/projects/nguc netmmc:/vol/vol2/nguc Password: Connecting to netmmc. Connecting to netmmc. init: error sending NDMP_MOVER_LISTEN message: Error: Connection has not been authorized
On the Netapp console I get:
Nov 05 06:27:21 [ndmpd:33]: Top level IOException Nov 05 06:27:21 [ndmpd:34]: Top level IOException Nov 05 06:27:21 [ndmpd:33]: IO exception: Socket closed. Nov 05 06:27:21 [ndmpd:34]: IO exception: Socket closed.
Any ideas?
Hi,
On the new version of ndmpcopy you do not need to supply the passwd on the command line, but rather you are prompted for it.
BTW, I also tried the old method mentioned below, and had the same result.
"Krause, Oliver" wrote:
You provided no password. Try:
ndmpcopy netmmc:/vol/vol1/projects/nguc netmmc:/vol/vol2/nguc -sa root:<password-source-filer> -da root:<password-dest-filer>
The root password is the one you use to login when you telnet to the filer ...
Oliver
-----Original Message----- From: Manny Kaiser [mailto:mkaiser@mmcnet.com] Sent: Sonntag, 5. November 2000 14:38 To: toasters@mathworks.com Subject: ndmpcopy error message
I get the following error message when trying to use the ndmpcopy command (latest version 1.2) on a F840 running 5.3.6H1R2.
The command and error messages are:
ndmpcopy netmmc:/vol/vol1/projects/nguc netmmc:/vol/vol2/nguc Password: Connecting to netmmc. Connecting to netmmc. init: error sending NDMP_MOVER_LISTEN message: Error: Connection has not been authorized
On the Netapp console I get:
Nov 05 06:27:21 [ndmpd:33]: Top level IOException Nov 05 06:27:21 [ndmpd:34]: Top level IOException Nov 05 06:27:21 [ndmpd:33]: IO exception: Socket closed. Nov 05 06:27:21 [ndmpd:34]: IO exception: Socket closed.
Any ideas?
Did you make sure "ndmpd on" was on the filer? What is the OS of the UNIX box? Did you modify the source code in any way?
Manny Kaiser wrote:
Hi,
On the new version of ndmpcopy you do not need to supply the passwd on the command line, but rather you are prompted for it.
BTW, I also tried the old method mentioned below, and had the same result.
"Krause, Oliver" wrote:
You provided no password. Try:
ndmpcopy netmmc:/vol/vol1/projects/nguc netmmc:/vol/vol2/nguc -sa root:<password-source-filer> -da root:<password-dest-filer>
The root password is the one you use to login when you telnet to the filer ...
Oliver
-----Original Message----- From: Manny Kaiser [mailto:mkaiser@mmcnet.com] Sent: Sonntag, 5. November 2000 14:38 To: toasters@mathworks.com Subject: ndmpcopy error message
I get the following error message when trying to use the ndmpcopy command (latest version 1.2) on a F840 running 5.3.6H1R2.
The command and error messages are:
ndmpcopy netmmc:/vol/vol1/projects/nguc netmmc:/vol/vol2/nguc Password: Connecting to netmmc. Connecting to netmmc. init: error sending NDMP_MOVER_LISTEN message: Error: Connection has not been authorized
On the Netapp console I get:
Nov 05 06:27:21 [ndmpd:33]: Top level IOException Nov 05 06:27:21 [ndmpd:34]: Top level IOException Nov 05 06:27:21 [ndmpd:33]: IO exception: Socket closed. Nov 05 06:27:21 [ndmpd:34]: IO exception: Socket closed.
Any ideas?
-- ******All New Numbers!!!****** ************* *************
Timothy A. McCarthy --> System Engineer, Eastern Region Network Appliance http://www.netapp.com 240-268-2034 Office \ / Page Me at: 240-268-2001 Fax / 888-971-4468
Hi,
Yes, I made sure that ndmpd was on. The OS is solaris 2.7 (106541-12) No I did not do any modifications to the source code.
"Timothy A. McCarthy" wrote:
Did you make sure "ndmpd on" was on the filer? What is the OS of the UNIX box? Did you modify the source code in any way?
Manny Kaiser wrote:
Hi,
On the new version of ndmpcopy you do not need to supply the passwd on the command line, but rather you are prompted for it.
BTW, I also tried the old method mentioned below, and had the same result.
"Krause, Oliver" wrote:
You provided no password. Try:
ndmpcopy netmmc:/vol/vol1/projects/nguc netmmc:/vol/vol2/nguc -sa root:<password-source-filer> -da root:<password-dest-filer>
The root password is the one you use to login when you telnet to the filer ...
Oliver
-----Original Message----- From: Manny Kaiser [mailto:mkaiser@mmcnet.com] Sent: Sonntag, 5. November 2000 14:38 To: toasters@mathworks.com Subject: ndmpcopy error message
I get the following error message when trying to use the ndmpcopy command (latest version 1.2) on a F840 running 5.3.6H1R2.
The command and error messages are:
ndmpcopy netmmc:/vol/vol1/projects/nguc netmmc:/vol/vol2/nguc Password: Connecting to netmmc. Connecting to netmmc. init: error sending NDMP_MOVER_LISTEN message: Error: Connection has not been authorized
On the Netapp console I get:
Nov 05 06:27:21 [ndmpd:33]: Top level IOException Nov 05 06:27:21 [ndmpd:34]: Top level IOException Nov 05 06:27:21 [ndmpd:33]: IO exception: Socket closed. Nov 05 06:27:21 [ndmpd:34]: IO exception: Socket closed.
Any ideas?
-- ******All New Numbers!!!******
Timothy A. McCarthy --> System Engineer, Eastern Region Network Appliance http://www.netapp.com 240-268-2034 Office \ / Page Me at: 240-268-2001 Fax / 888-971-4468
One way to prove it is not a password problem is to remove the passwd's alltogether from both nodes that you are copying to <--> from and try it again. If it works after your completely remove the passwd's then it was a password problem. (To remove the password completely just issue the "passwd" command and give empty strings as the new password). ~~~~~~~~~~~~~~~ Mike Smith Network Appliance Escalations Engineer 408-822-4755 mikesmit@netapp.com Get your answers on http://now.netapp.com ~~~~~~~~~~~~~~~~~ ----- Original Message ----- From: Timothy A. McCarthy tmac@netapp.com To: Manny Kaiser mkaiser@mmcnet.com; toasters@mathworks.com Sent: Sunday, November 05, 2000 7:42 AM Subject: Re: ndmpcopy error message
Did you make sure "ndmpd on" was on the filer? What is the OS of the UNIX box? Did you modify the source code in any way?
Manny Kaiser wrote:
Hi,
On the new version of ndmpcopy you do not need to supply the passwd on
the command
line, but rather you are prompted for it.
BTW, I also tried the old method mentioned below, and had the same
result.
"Krause, Oliver" wrote:
You provided no password. Try:
ndmpcopy netmmc:/vol/vol1/projects/nguc netmmc:/vol/vol2/nguc -sa root:<password-source-filer> -da root:<password-dest-filer>
The root password is the one you use to login when you telnet to the
filer ...
Oliver
-----Original Message----- From: Manny Kaiser [mailto:mkaiser@mmcnet.com] Sent: Sonntag, 5. November 2000 14:38 To: toasters@mathworks.com Subject: ndmpcopy error message
I get the following error message when trying to use the ndmpcopy
command
(latest version 1.2) on a F840 running 5.3.6H1R2.
The command and error messages are:
ndmpcopy netmmc:/vol/vol1/projects/nguc netmmc:/vol/vol2/nguc Password: Connecting to netmmc. Connecting to netmmc. init: error sending NDMP_MOVER_LISTEN message: Error: Connection has
not been
authorized
On the Netapp console I get:
Nov 05 06:27:21 [ndmpd:33]: Top level IOException Nov 05 06:27:21 [ndmpd:34]: Top level IOException Nov 05 06:27:21 [ndmpd:33]: IO exception: Socket closed. Nov 05 06:27:21 [ndmpd:34]: IO exception: Socket closed.
Any ideas?
-- ******All New Numbers!!!******
Timothy A. McCarthy --> System Engineer, Eastern Region Network Appliance http://www.netapp.com 240-268-2034 Office \ / Page Me at: 240-268-2001 Fax / 888-971-4468
-
Krause, Oliver -
Manny Kaiser -
Mike Smith -
Timothy A. McCarthy