Hi Michel,

This is neto from NetApp Brazil.

How are you?

The terminal services is not good to manage new hardware resources.

2 tips :

- If you need to use Terminal Services - Workaround : Please logoff your session and login again. Now I can see the new hardware resources, the NetApp disks.

- Another tip is that you can use another terminal services, for example : Pc Anywhere (not free) or UltraVNC (free) - http://sourceforge.net/projects/ultravnc . I've make tests using PC Anywhere and UltraVNC and this problems doesn't ocurr.

If you need more informations or any help, please let me know.

Best Regards from Brazil.

neto

-----Original Message----- From: Michel Geldenhuys [mailto:michel@geldenhuys.com] Sent: Friday, January 09, 2004 4:58 AM To: toasters@mathworks.com Subject: RE: iSCSI HOWTO question

Hi,

Just beware that is you do the stuff through a Terminal Server connection, you might not see the new disk devices in disk administrator. So consider doing the disk configuration on the console.

Kind regards, Michel Geldenhuys

-----Original Message----- From: owner-toasters@mathworks.com

[mailto:owner-toasters@mathworks.com]

On Behalf Of Haber, David J. Sent: jeudi 8 janvier 2004 18:43 To: toasters@mathworks.com Subject: RE: iSCSI HOWTO question

Once the Lun is created and properly set up on the Windows (2000?) server, you should be able to do a scan of your drives in disk manager

and it will show up. Then format and your good to go.

-----Original Message----- From: Geoff Hardin [mailto:geoff.hardin@dalsemi.com] Sent: Thursday, January 08, 2004 11:59 AM To: toasters Subject: iSCSI HOWTO question

I am new to the SAN environment, and most especially to the iSCSI 

way of doing things. I have the iSCSI protocol enabled on my filer,

and

I have the Microsoft iSCSI initiator downloaded and installed on my

PC.

From the filer, I have created a couple LUNs on my filer, I have created igroups, mapped the LUNs to the igroups, set the create_ucode option to on, and started the iSCSI service. On the Windows system, I

have added the target portal, logged on, and I can see an active session. I think I have all the basics under control. What I can't seem to figure out is how the LUNs now show up as

being

somehow connected to my Windows computer. I'm sure I've missed something, but I can't figure out what. I've tried reading the "ONTAP

SysAdmin Block Access Management Guide" and working through the

examples

step by step, still to no avail. Some details:

Host (initiator): Windows 2000 ONTAP version 6.4.3 toaster> iscsi show adapter Adapter: iswta Slot: N/A Description: NetApp Software Implementation Status: Online Target Portal Groups: portal group 1: inet 192.168.1.3 port 3260

toaster> igroup show windows-igroup0 (iSCSI) (ostype: windows): iqn.1992-08.com.netapp:sn.123456789

toaster> lun show -v /vol/vol0/iscsi/lun0 10.0g (10742215680) (r/w,

online,

mapped) Comment: "iSCSI test lun0" Serial#: HPlwFYo6bJoZ Share: none Space Reservation: enabled Multiprotocol Type: windows Maps: windows-igroup0=0 /vol/vol0/iscsi/lun1 10.0g (10742215680) (r/w,

online,

mapped) Comment: "iSCSI test lun1" Serial#: HPlwFYo6bQDV Share: none Space Reservation: enabled Multiprotocol Type: windows Maps: windows-igroup0=1

toaster> iswt interface show Interface e0 enabled

toaster> iscsi nodename iSCSI target nodename: iqn.1992-08.com.netapp:sn.123456789

Any help would be greatly appreciated.

Thanks,

Geoff Hardin geoff.hardin@dalsemi.com

Confidentiality Notice: This message, and any attachments, may contain information that is confidential, privileged, and/or protected from disclosure under state

and

federal laws that deal with the privacy and security of medical information. If you received this message in error or through inappropriate means, please reply to this message to notify the Sender

that the message was received by you in error, and then permanently

delete

this message from all storage media, without forwarding or retaining a

copy.