The information contained in this message is confidential and may be legally privileged. The message is intended solely for the addressee(s). If you are not the intended recipient, you are hereby notified that any use, dissemination, or reproduction is strictly prohibited and may be unlawful. If you are not the intended recipient, please contact the sender by return e-mail and destroy all copies of the original message.
Hello people,
I've just received a new F720 and a want to hookup a laptop with hyperterminal to the filer. Can anybody tell me how to configure the laptop/hypertermial to get it started?
TIA,
Jan & Leonard
Leonard, I have NT 4.0 on my laptop, and I am using the HyperTerminal program to connect to the Filer. Here are my settings on the Comm Port and Program:
BPS = 9600 Data = 8 Parity = None Stop Bits = 1 Flow Control = None Emulation = ANSI
Hope this helps, Mike
-----Original Message----- From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com]On Behalf Of leonard.galinsky@philips.com Sent: Wednesday, September 08, 1999 10:36 AM To: toasters@mathworks.com Subject: hooking up laptop to a filer
The information contained in this message is confidential and may be legally privileged. The message is intended solely for the addressee(s). If you are not the intended recipient, you are hereby notified that any use, dissemination, or reproduction is strictly prohibited and may be unlawful. If you are not the intended recipient, please contact the sender by return e-mail and destroy all copies of the original message.
Hello people,
I've just received a new F720 and a want to hookup a laptop with hyperterminal to the filer. Can anybody tell me how to configure the laptop/hypertermial to get it started?
TIA,
Jan & Leonard
Hi Leonard,
The information contained in this message is confidential and may be legally privileged. The message is intended solely for the addressee(s). If you are not the intended recipient, you are hereby notified that any use, dissemination, or reproduction is strictly prohibited and may be unlawful. If you are not the intended recipient, please contact the sender by return e-mail and destroy all copies of the original message.
Just for the record, I didn't see a thing.
I've just received a new F720 and a want to hookup a laptop with hyperterminal to the filer. Can anybody tell me how to configure the laptop/hypertermial to get it started?
The most important thing is to make sure that you have hardware flow control turned _off_. Otherwise, you will probably be able to see the output from the console, but won't be able to type anything.
---
Lee Razo (lrazo@netapp.com) Network Appliance, Inc. Santa Clara, Ca. http://www.netapp.com/
-
Lee Razo -
leonard.galinskyï¼ philips.com -
Mike Ball