Hello,

Has anyone tried to use the new Gigabit Ethernet II (Intel) cards using a single vif in a cluster? I have tried these cards individually and failed the cluster over and everything works just fine but if I put them in a single/multi vif and fail the cluster, I can ping the machine, I can telnet to it and it states that it has failed over, I can http to it; however when I try NFS connections to it, it does not respond?

Any suggestions?

Config file (Partner rc is nearly identical):

## # RC, file san1 -- MJR # Network 172.17.1.0 to be changed after testing -- MJR # Modified for testing -- MJR ## hostname san1 options dns.domainname blackberry.net options dns.enable on options nis.enable off # Setup Virtual Interfaces ifconfig e6 flowcontrol none ifconfig e7 flowcontrol none vif create single sanvif e6 e7 vif favor e6 # configure interfaces ifconfig e0 192.168.200.110 netmask 255.255.255.0 mediatype 100tx-fd partner 192.168.200.111 ifconfig sanvif 172.17.1.110 netmask 255.255.255.0 trusted partner sanvif

# Test, works if vif not configured - MJR #ifconfig e6 172.17.1.110 netmask 255.255.255.0 partner e6

route add default 192.168.200.1 1 savecore exportfs -a nfs on vol snapmirror on ##

Michael

Michael J. Rogan BlackBerry Sys. Adm. Research In Motion 519-888-7465 www.blackberry.net www.rim.net