Hi Daniel
I see a line which says autosupport.support.transport https
Which means the filer will use https to send autosupports, and not smtp.
Can you try options autosupport.support.transport smtp
And see if the mails go through?
cheers Kenneth
Kenneth Heal Databasement BV The Netherlands
Subject: Autosupport failing to mailhost Date: Tue, 12 Feb 2008 10:22:51 -0600 From: daniel.keisling@austin.ppdi.com To: toasters@mathworks.com
Hello,
From what seems out of the blue, Autosupport emails are no longer able to be sent to my mailhost (Exchange 2003 on the same subnet):
"Autosupport cannot connect to host rtpmail01.americas.ppdi.local (Network comm problem) for message: USER_TRIGGERED (TEST)"
This message will be thrown until the message is eventually dropped. My Exchange administrator does not see any connections coming from the filer to send this email. I can ping the mailhost with no problem:
rtpstore2b> ping rtpmail01.americas.ppdi.local rtpmail01.americas.ppdi.local is alive
My routing table:
Destination Gateway Flags Refs Use Interface default 172.20.63.254 UGS 4 222239 e0a 127 localhost UGS 0 22236 lo localhost localhost UH 3 145 lo 172.20.62/23 link#4 UC 0 0 e0a rtpmail01.americ 0:8:2:28:ee:86 UHL 0 11 e0a rtpexchbe01.amer 0:8:2:28:ee:86 UHL 0 0 e0a rtpstore2b 0:a0:98:9:66:53 UHL 0 18112 lo
My autosupport options:
rtpstore2b> options autosupport autosupport.cifs.verbose off autosupport.content complete autosupport.doit DONT autosupport.enable on autosupport.from rtpstore2b at rtp.ppdi.com autosupport.local.nht_data.enable off autosupport.local.performance_data.enable off autosupport.mailhost rtpmail01.americas.ppdi.local autosupport.minimal.subject.id hostname autosupport.nht_data.enable on autosupport.noteto autosupport.performance_data.enable on autosupport.retry.count 15 (value might be overwritten in takeover) autosupport.retry.interval 4m (value might be overwritten in takeover) autosupport.support.enable on autosupport.support.proxy autosupport.support.to autosupport at netapp.com autosupport.support.transport https autosupport.support.url support.netapp.com/asupprod/post/1.0/postAsup autosupport.throttle on autosupport.to storage at wilm.ppdi.com
(I've replaced the @'s with 'at')
I have no problems with my SSH session, so I don't know how this could be a network cable/connection problem. Are there any debugging steps I can do? Has anyone seen this before? It has definitely worked in the past. This is DOT 7.2.2 on a FAS3040.
TIA,
Daniel
______________________________________________________________________
This email transmission and any documents, files or previous email
messages attached to it may contain information that is confidential or
legally privileged. If you are not the intended recipient or a person
responsible for delivering this transmission to the intended recipient,
you are hereby notified that you must not read this transmission and
that any disclosure, copying, printing, distribution or use of this
transmission is strictly prohibited. If you have received this transmission
in error, please immediately notify the sender by telephone or return email
and delete the original transmission and its attachments without reading
or saving in any manner.
_________________________________________________________________ Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/